Vivotek 4X-IP7142 manual Http

Page 31

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

►Enabling UPnP port forwarding allows the Network Camera to open secondary HTTP port on the router, not HTTP port, meaning that you have to add the secondary HTTP port number behind the Network Camera’s public address in order to access the Network Camera from the Internet. For example, when the HTTP port is set to 80 and the secondary HTTP port is set to 8080, refer to the list below for the Network Camera’s IP address.

From the Internet

In a LAN

http://203.67.124.123:8080

http://192.168.4.160 or

 

http://192.168.4.160:8080

►If the PPPoE settings are incorrectly configured or the Internet access is not working, restore the Network Camera to factory default; please refer to Restore on page 61 for details. After the Network Camera is reset to factory default, it is accessible in a LAN.

HTTP

Authentication: Depending on your network security requirements, the Network Camera provides two

types of security settings for a HTTP transaction: basic and digest. If basic authentication is selected, the password is sent in plain text format; there can be potential risks of being intercepted. If digest authentication is selected, user credentials are encrypted in MD5 algorithm and thus provide better protection against unauthorized accesses.

HTTP port / Secondary HTTP port: By default, the HTTP port is set to 80 and the secondary HTTP port is set to 8080. Also, they can be assigned with another port number between 1025 and 65535. If the ports are incorrectly assigned, the following warning messages are displayed:

To access the Network Camera within a LAN, both HTTP port and secondary HTTP port can be used to access the Network Camera. For example, when the HTTP port is set to 80 and the secondary HTTP port is set to 8080, refer to the list below for the Network Camera’s IP address.

In a LAN

http://192.168.4.160 or

http://192.168.4.160:8080

Access name for stream 1 / Access name for stream 2: The access name is used to differentiate the streaming source. When using Mozilla Firefox or Netscape to access the Network Camera, and the video mode is set to JPEG, users will receive continuous JPEG pictures. This technology, known as “server push”, allows the Network Camera to feed live pictures to Mozilla Firefox and Netscape.

Use http://<ip address>:<http port>/<access name for stream1 or stream2> to make connection.

User's Manual - 31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents Page Table of Contents Read before use Package contentsPhysical description ConnectorsDI/DO Diagram Hardware Reset Hardware installationWall mount Ceiling mount Network deployment Ethernet switchInternet connection with static IP Set up the Network Camera through Power over Ethernet PoE 0002D17142AD Software installationUsing web browsers Accessing the Network CameraPage Using Rtsp players MPEG-4 Using 3GPP-compatible mobile devicesUsing Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System SystemSystem Time DI and do Manage User Root PasswordSecurity Add UserCreate and Install Certificate Enable HttpsTo create a self-signed certificate Certificate Information Network Type NetworkPPPoE Point-to-point over Ethernet Page Http Two way audio HttpsFTP Rtsp Streaming Page Ddns Ddns Dynamic domain name serviceCustomSafe100 Allowed list / Denied list Access listDelete allowed list / Delete denied list Audio and video Video settingsImage Settings Privacy mask Page Page Audio settings Motion detection To enable motion detection, follow the steps belowPercentage = 30% Camera control RS485 SettingsCustom Command Preset PositionNetwork Camera Application Media SettingsSnapshot20080104100341 Server Settings Page Page Event Settings Page Recording Recording SettingsPage Remote Log System logCurrent Log View parameters Reboot MaintenanceRestore Upload / Export Daylight Saving Time Configuration File Upgrade Firmware Page Overview URL Commands of the Network CameraStyle convention Method GET/POST General CGI URL syntax and parametersSecurity level Get server parameter valuesSet server parameter values Page Available parameters on the server Timezoneindex 489 ~ Group doi0~ndo-1 Group dii0~ndi-1Subgroup of network http Group securitySubgroup of network rtsp Subgroup of network httpsSubgroup of network pppoe Group ipfilter Page Page Adjust saturation of image according to mode settings Group upnpportforwarding Group upnppresentation= Logalert = Logcrit Group uarti0~n-1 n is uart port count EvenGroup capability Group eventi0~2 Group serveri0~4 Group recordingi0~1 Group mediai0~4To enable or disable this recoding Query status of the digital input Drive the digital outputCapture single snapshot Query status of the digital outputAccount management Method Post Upgrade firmwareSystem logs System InformationMethod GET/POST IP filteringOpen the network streamings Get SDP of StreamingsSenddata Page Lens Technical SpecificationsTechnology License Notice Electromagnetic Compatibility EMC
Top Page Image Contents