Vivotek 4X-IP7142 manual Image Settings

Page 40

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Video orientation: Flip--vertically reﬂect the display of the live video; Mirror--horizontally reﬂect the display of the live video. Select both options if the Network Camera is installed upside-down (ex. on the ceiling) to correct the image orientation.

White balance: Adjust the value for best color temperature. ■ Auto

The Network Camera automatically adjusts the color temperature of light in response to different light sources. The white balance setting defaults to Auto and works well in most situations.

■ Keep current value

Follow the steps below to manually set the white balance to compensate for the ambient lighting conditions.

1.Set the White balance to Auto.

2.Place a sheet of white paper in front of the lens; then allow the Network Camera to adjust the color temperature automatically.

Maximum Exposure Time: 1/30 S, 1/15 S, 1/5 S, and Auto.

Overlay title and time stamp on video: Select this option to place the video title and time on video streams.

Note that when the frame size is set to 176 x 144 as the right picture below, only time will be stamped on video streams.

IP7142(TCP-AV)		IP7142(TCP-AV)

IP7142 10:02:45 2008/05/02

10:02:45 2008/05/02

Image Settings

Click Image settings to open the Image Settings page. In this page, you can tune Brightness, Saturation, Contrast, and Hue for video compensation. Each ﬁeld has eleven levels ranged from -5 to +5. The value 0 indicates default auto tuning. You can click Preview to ﬁne-tune the image, or click Restore to recall the original settings without incorporating the changes. When completed with the settings on this page, click Save to take effect and click Close to quit the page.

40 - User's Manual

Image 40

Contents Page Table of Contents Package contents Read before useConnectors Physical descriptionDI/DO Diagram Hardware installation Hardware ResetWall mount Ceiling mount Ethernet switch Network deploymentInternet connection with static IP Set up the Network Camera through Power over Ethernet PoE Software installation 0002D17142ADAccessing the Network Camera Using web browsersPage Using Rtsp players Using 3GPP-compatible mobile devices MPEG-4Using Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System SystemSystem Time DI and do Root Password SecurityAdd User Manage UserEnable Https Create and Install CertiﬁcateTo create a self-signed certificate Certificate Information Network Network TypePPPoE Point-to-point over Ethernet Page Http Https Two way audioFTP Rtsp Streaming Page Ddns Dynamic domain name service DdnsCustomSafe100 Allowed list / Denied list Access listDelete allowed list / Delete denied list Video settings Audio and videoImage Settings Privacy mask Page Page Audio settings To enable motion detection, follow the steps below Motion detectionPercentage = 30% RS485 Settings Camera controlPreset Position Custom CommandNetwork Camera Media Settings ApplicationSnapshot20080104100341 Server Settings Page Page Event Settings Page Recording Settings RecordingPage Remote Log System logCurrent Log View parameters Reboot MaintenanceRestore Upload / Export Daylight Saving Time Conﬁguration File Upgrade Firmware Page Overview URL Commands of the Network CameraStyle convention General CGI URL syntax and parameters Security levelGet server parameter values Method GET/POSTSet server parameter values Page Available parameters on the server Timezoneindex 489 ~ Group dii0~ndi-1 Group doi0~ndo-1Group security Subgroup of network httpSubgroup of network rtsp Subgroup of network httpsSubgroup of network pppoe Group ipfilter Page Page Adjust saturation of image according to mode settings Group upnppresentation Group upnpportforwarding= Logalert = Logcrit Even Group uarti0~n-1 n is uart port countGroup capability Group eventi0~2 Group serveri0~4 Group mediai0~4 Group recordingi0~1To enable or disable this recoding Drive the digital output Query status of the digital inputQuery status of the digital output Capture single snapshotAccount management Upgrade ﬁrmware System logsSystem Information Method PostIP ﬁltering Method GET/POSTOpen the network streamings Get SDP of StreamingsSenddata Page Technical Speciﬁcations LensTechnology License Notice Electromagnetic Compatibility EMC