Vivotek 4X-IP7142 manual Internet connection with static IP

Page 9

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

2.In this case, if the Local Area Network (LAN) IP address of your Network Camera is 192.168.0.3, please forward the following ports for the Network Camera on the router.

■HTTP port

■RTSP port

■RTP port for audio

■RTCP port for audio

■RTP port for video

■RTCP port for video

If you have changed the port numbers on the Network page, please open the ports accordingly on your router. For information on how to forward ports on the router, please refer to the user’s manual of your router.

3.Find out the public IP address of your router provided by your ISP (Internet Service Provider). Use the public IP and the secondary HTTP port to access the Network Camera from the Internet. Please refer to Network Type on page 28 for details.

Internet connection with static IP

Choose this connection type if you are required to use a static IP for the Network Camera and follow the steps below.

1.Set up the Network Camera in a LAN. Please refer to Software installation on page 10 for details.

2.Go to Conﬁguration > Network > Network Type. Select LAN > Use ﬁxed IP address.

3.Enter the static IP, Subnet mask, Default router, Primary DNS provided by your ISP.

Internet connection via PPPoE (Point-to-Point over Ethernet)

Choose this connection type if you are connected to the Internet via a DSL Line. Please refer to PPPoE on page 29 for details.

User's Manual - 9

Image 9

Contents Page Table of Contents Read before use Package contentsPhysical description ConnectorsDI/DO Diagram Hardware Reset Hardware installationWall mount Ceiling mount Network deployment Ethernet switchInternet connection with static IP Set up the Network Camera through Power over Ethernet PoE 0002D17142AD Software installationUsing web browsers Accessing the Network CameraPage Using Rtsp players MPEG-4 Using 3GPP-compatible mobile devicesUsing Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System SystemSystem Time DI and do Security Root PasswordAdd User Manage UserCreate and Install Certiﬁcate Enable HttpsTo create a self-signed certificate Certificate Information Network Type NetworkPPPoE Point-to-point over Ethernet Page Http Two way audio HttpsFTP Rtsp Streaming Page Ddns Ddns Dynamic domain name serviceCustomSafe100 Access list Allowed list / Denied listDelete allowed list / Delete denied list Audio and video Video settingsImage Settings Privacy mask Page Page Audio settings Motion detection To enable motion detection, follow the steps belowPercentage = 30% Camera control RS485 SettingsCustom Command Preset PositionNetwork Camera Application Media SettingsSnapshot20080104100341 Server Settings Page Page Event Settings Page Recording Recording SettingsPage System log Remote LogCurrent Log View parameters Maintenance RebootRestore Upload / Export Daylight Saving Time Conﬁguration File Upgrade Firmware Page URL Commands of the Network Camera OverviewStyle convention Security level General CGI URL syntax and parametersGet server parameter values Method GET/POSTSet server parameter values Page Available parameters on the server Timezoneindex 489 ~ Group doi0~ndo-1 Group dii0~ndi-1Subgroup of network http Group securitySubgroup of network https Subgroup of network rtspSubgroup of network pppoe Group ipfilter Page Page Adjust saturation of image according to mode settings Group upnpportforwarding Group upnppresentation= Logalert = Logcrit Group uarti0~n-1 n is uart port count EvenGroup capability Group eventi0~2 Group serveri0~4 Group recordingi0~1 Group mediai0~4To enable or disable this recoding Query status of the digital input Drive the digital outputCapture single snapshot Query status of the digital outputAccount management System logs Upgrade ﬁrmwareSystem Information Method PostMethod GET/POST IP ﬁlteringGet SDP of Streamings Open the network streamingsSenddata Page Lens Technical SpeciﬁcationsTechnology License Notice Electromagnetic Compatibility EMC