Vivotek 4X-IP7142 manual Access list, Allowed list / Denied list

Page 38

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

Access list

This section explains how to control the access permission by checking the client PC’s IP addresses. It is composed of the following four columns: Allowed list, Denied list, Delete allowed list, and Delete denied list.

Allowed list / Denied list

There are two lists for permission control: Allowed list and Denied list. Only those clients whose IP addresses are in the Allowed list and not in the Denied list can access the Network Camera.

1.In the Allowed list or Denied list column, type the starting IP address and ending IP address in the text boxes. A total of ten lists can be conﬁgured for both columns.

2.Click Add to take effect.

NOTE

►For example, when the range of allowed list is set from 1.1.1.0 to 192.255.255.255 and the range of denied list is set from 1.1.1.0 to 170.255.255.255, Only users’ IP located between 171.0.0.0 and 192.255.255.255 can access the Network Camera.

Alowed Denied

List List

Delete allowed list / Delete denied list

1.In the Delete allowed list or Delete denied list, select a list from the drop-down list.

2.Click Delete to take effect.

38 - User's Manual

Image 38

Contents Page Table of Contents Package contents Read before useConnectors Physical descriptionDI/DO Diagram Hardware installation Hardware ResetWall mount Ceiling mount Ethernet switch Network deploymentInternet connection with static IP Set up the Network Camera through Power over Ethernet PoE Software installation 0002D17142ADAccessing the Network Camera Using web browsersPage Using Rtsp players Using 3GPP-compatible mobile devices MPEG-4Using Vivotek recording software Main Live Video Window Video title Title and time Client Settings MP4 Saving Options System Time SystemSystem DI and do Add User Root PasswordSecurity Manage UserEnable Https Create and Install CertiﬁcateTo create a self-signed certificate Certificate Information Network Network TypePPPoE Point-to-point over Ethernet Page Http Https Two way audioFTP Rtsp Streaming Page Ddns Dynamic domain name service DdnsCustomSafe100 Delete allowed list / Delete denied list Access listAllowed list / Denied list Video settings Audio and videoImage Settings Privacy mask Page Page Audio settings To enable motion detection, follow the steps below Motion detectionPercentage = 30% RS485 Settings Camera controlPreset Position Custom CommandNetwork Camera Media Settings ApplicationSnapshot20080104100341 Server Settings Page Page Event Settings Page Recording Settings RecordingPage Current Log System logRemote Log View parameters Restore MaintenanceReboot Upload / Export Daylight Saving Time Conﬁguration File Upgrade Firmware Page Style convention URL Commands of the Network CameraOverview Get server parameter values General CGI URL syntax and parametersSecurity level Method GET/POSTSet server parameter values Page Available parameters on the server Timezoneindex 489 ~ Group dii0~ndi-1 Group doi0~ndo-1Group security Subgroup of network httpSubgroup of network pppoe Subgroup of network httpsSubgroup of network rtsp Group ipfilter Page Page Adjust saturation of image according to mode settings Group upnppresentation Group upnpportforwarding= Logalert = Logcrit Even Group uarti0~n-1 n is uart port countGroup capability Group eventi0~2 Group serveri0~4 Group mediai0~4 Group recordingi0~1To enable or disable this recoding Drive the digital output Query status of the digital inputQuery status of the digital output Capture single snapshotAccount management System Information Upgrade ﬁrmwareSystem logs Method PostIP ﬁltering Method GET/POSTSenddata Get SDP of StreamingsOpen the network streamings Page Technical Speciﬁcations LensTechnology License Notice Electromagnetic Compatibility EMC