Network Camera User’s Manual
Video record
Schedule mode
(1)“Every day” Enable/Disable every day application.
(2)“Week day” Enable/Disable week day application.
(3)“Selected day” Enable/Disable selected day application.
Schedule information
(1)Enter the “Start time” and “Stop time” for day mode.
Note that the time format is [hh:mm] and is expressed in
(2)“Sun”/“Mon”/“Tue”/“Wed”/“Thu”/“Fri”/“Sat” Select the days of the week to perform the application.
(3)―Start day‖ and ―Start time‖ as the start timing the time. ―End day‖ and ―End time‖ as the end timing the time
(4)“Enable cyclic recording” The cyclic recording function is enabled, during the transaction stage when a storage space is full and the incoming streaming data is about
27/59