Edimax Technology PT-112E & MD-111E, PT-111E user manual Connect to the Network Camera

Page 8

Network Camera User’s Manual

Connect to the Network Camera

Locate the IP address of Network IP Camera

You can use your new Network IP Camera by its web user interface via web browser. Currently the viewing system requirement for Network IP camera is:

■OS: Microsoft Windows XP/Vista/7

■Browser: IE7, 8, 9 (32Bit)

■Cell phone: 3GPP player

Note: For best viewing experience we recommend that you use Microsoft Windows Internet Explorer 7, 8, or 9.

By default, the network camera automatically obtains an IP address from the DHCP server on your local network. Check your DHCP server‘s IP address lease table to find the network camera‘s IP address, or use the EdiView Finder utility included in the CD.

Note: We recommend that you use Microsoft Windows to install your network camera - Mac is not supported.

1.Insert the CD into your CD-ROM drive. When the wizard appears, click ―Setup Utility‖ to install the ―EdiView Finder‖ software.

8/59

Image 8

Contents PT-111E / PT-112E & MD-111E Table of Contents Overview Minimum System RequirementPackage Contents Wired cover Slide cover Reset button Micro SD/SDHCConnections Internal Microphone Light sensor LensHardware Installation Power over Ethernet PoE  Using a PoE-enabled switch Connect to the Network Camera Locate the IP address of Network IP CameraNetwork Camera User’s Manual Initial Access to the Network Camera Video will be displayed Configuration functions Primary user’s capabilityCamera view View capabilitiesPan/Tilt & connection control buttons PT-111E / PT-112E only Client Setting 16/59 Definitions in Configuration General Setting Host nameLED indicator System parametersTime Setting Time zone Adjust by NTP serverDaylight saving Current TimeManage user Security settingSecurity 20/59 Network Setting NetworkLAN & PPPoE LANPPPoE Ddns SettingGet IP address automatically Use fixed IP address 23/59 Access list Access list settingAudio and Video setting General SettingAudio Setting Video SettingInfrared Led Setting Schedule information Schedule modeVideo record Record parameters 1NASAudio codec setting Video codec settingStream Bit rateSnapshot and time display setting Camera control PT-111E / PT-112E only Camera controlPatrol list setting Application Sun/Mon/Tue/Wed/Thu/Fri/Sat Select the daysTrigger mode Media modeSnapshot & Record file setting Response mode4NAS NAS server setting Storage StatusFile operation Syslog Status and Parameters Maintenance Export/Import file Q2 What kind of Ethernet cable is used by network camera? AppendixQ1 Status led does not light up 43/59 44/59 Q6 How can I restore the network camera to default value? Q10 The cover of network camera is warm. Is it normal? Q12 The process of upgrade firmware abortQ7 I cannot play the recorded video file Camera from Internet Explorer A13Ip-discovery.comFree Ddns service 49/59 Current device Federal Communication Commission Interference Statement EU Countries Not Intended for Use EU Declaration of Conformity Weee Directive & Product Disposal 55/59 56/59 No Warranty 58/59 Network Camera User’s Manual 59/59