Edimax Technology MD-111E Pan/Tilt & connection control buttons PT-111E / PT-112E only

Page 14

Network Camera User’s Manual

Pan/Tilt & connection control buttons: (PT-111E / PT-112E only)

1.“Connection” User can choose Remote or Local mode for best connection quality.

Proposal: Internet environment, switch Remote mode.

2.“Video Stream” User can choose stream1 or stream2.

3.“The direction buttons are” ―Left‖, ―Right‖, ―Up‖, ―Down‖, ―Cross Angles‖, and ―Home‖. Camera returns to center when click ―Home‖ button

4.“Pan Angle” User can choose the angles when the camera moves left and right each time.

5.“Tilt Angle” User can choose the angles when the camera moves up and down each time.

6.“Pan” The camera will move from right side to left side continuously when click the button.

7.“Patrol” The button directs the camera to patrol among the preset positions in the patrol list, which can be modified on the “Camera control page”. The cycle of patrol is from 1 to Unlimited.

8.“Video Tracking” is able to track dynamic objects within screen video.

14/59

Image 14
Contents PT-111E / PT-112E & MD-111E Table of Contents Overview Minimum System RequirementPackage Contents Connections Wired cover Slide coverReset button Micro SD/SDHC Internal Microphone Light sensor LensHardware Installation Power over Ethernet PoE  Using a PoE-enabled switch Connect to the Network Camera Locate the IP address of Network IP CameraNetwork Camera User’s Manual Initial Access to the Network Camera Video will be displayed Configuration functions Primary user’s capabilityCamera view View capabilitiesPan/Tilt & connection control buttons PT-111E / PT-112E only Client Setting 16/59 LED indicator Definitions in ConfigurationGeneral Setting Host name System parametersDaylight saving Time Setting Time zoneAdjust by NTP server Current TimeManage user Security settingSecurity 20/59 LAN & PPPoE Network SettingNetwork LANPPPoE Ddns SettingGet IP address automatically Use fixed IP address 23/59 Access list Access list settingAudio and Video setting General SettingAudio Setting Video SettingInfrared Led Setting Schedule information Schedule modeVideo record Record parameters 1NASStream Audio codec settingVideo codec setting Bit rateSnapshot and time display setting Camera control PT-111E / PT-112E only Camera controlPatrol list setting Application Sun/Mon/Tue/Wed/Thu/Fri/Sat Select the daysSnapshot & Record file setting Trigger modeMedia mode Response mode4NAS NAS server setting Storage StatusFile operation Syslog Status and Parameters Maintenance Export/Import file Q2 What kind of Ethernet cable is used by network camera? AppendixQ1 Status led does not light up 43/59 44/59 Q6 How can I restore the network camera to default value? Q10 The cover of network camera is warm. Is it normal? Q12 The process of upgrade firmware abortQ7 I cannot play the recorded video file Camera from Internet Explorer A13Ip-discovery.comFree Ddns service 49/59 Current device Federal Communication Commission Interference Statement EU Countries Not Intended for Use EU Declaration of Conformity Weee Directive & Product Disposal 55/59 56/59 No Warranty 58/59 Network Camera User’s Manual 59/59