Arcam Using the remote control, CR-389 Remote Control, Not used with A65/A75, Tuner controls

Using the remote control

CR-389 Remote Control

The CR-389 remote control gives access to all functions available on the front panel. It also has controls to operate Arcam CD players, AM/FM and DAB tuners.

		TUNER
FM	DAB				Not used with A65/A75
					The Power/Standby button does not
FM		MENU	DISP		operate with the A65 and A75
DAB					amplifiers.
Tuner controls
		2-10	3-11	4-12
1-9
These offer basic control of
Arcam tuners.		6-14	7-15	8-16
5-13
MODE				BAND
			SP1		Not used with A65/A75
ENTER			SP2	DISP	These control features of other
					amplifiers in the Arcam range.
	SEL
					Volume and Mute (		)
					Press + to increase volume or – to decrease the
					output volume on the amplifier.
					Press	to mute the speaker connections and
					preamp outputs. Both tape outputs and the
					headphone socket remain active.
PHONO		AUX	CD	TUNER	Mute is disabled either by pressing			again, or
Input selection buttons
					by adjusting the volume.
These operate in the same
AV		DVD	VCR	TAPE
way as the input selector
on the front panel of your		AMPLIFIER
integrated amplifier.
				RPT	CD controls
			PROG	DISP	These offer basic controls of
					Arcam CD players.
		CD
		CR-389

NOTE: Remember to install the two supplied AAA batteries before trying to use your remote control!

Do not place anything in front of the IR receiver on the

left of the A65 or A75, or the remote control may not

A65/A75/P75

work.

7