Arcam Multichannel Power Amplifier manual Troubleshooting

Page 10

Troubleshooting

NO LIGHTS ON THE UNIT

Check that:

the power cord is plugged into the P7 and the mains socket outlet it is plugged into is switched on.

the plug fuse has not failed, or a circuit-breaker earlier in the power supply path has not opened.

the power button is pressed in.

RED LED PRESENT

Refer to the ‘Fault Status Indicators’ table if you have an unusual sequence of LEDs.

NO SOUND IS PRODUCED

Check that:

the correct input has been selected on the pre-amp.

you have assigned the digital input to the correct input source.

the volume is turned up to a reasonable level and ‘MUTE’ is not displayed on the front panel display on the pre-amp.

your power amplifier(s) are turned on and working correctly.

SOUND IS POOR AND BADLY DISTORTED

Check that:

all cables are making a good connection. If necessary withdraw the cable from the connector and plug it back in again. (Turn the power off before doing this.)

you have selected the correct size of speakers to suit your system in the setup menu of the processor or pre-amp.

SOUND ONLY COMES FROM SOME OF THE SPEAKERS

Check that:

all speakers in the system are connected to the P7.

you have configured your pre-amp to include all the speakers in your system.

you have an appropriate surround sound source selected and playing through the pre-amp.

for digital sources, check the player is outputting multichannel data. With some DVD players you are able to select in what format multi-format encoded discs are outputted, and whether multichannel data is down mixed to PCM (stereo).

the disc you are playing is a multichannel recording and that the processor is outputting multichannel audio.

your speaker balance is correct.

all amplifiers are turned on and all channels are working correctly.

all units are turned on. If the audio is ‘daisy-chained’ from the P7, make sure that the unit being fed is turned on.

HUM ON AN AMPLIFIER OUTPUT

Check that:

all cables are making a good connection. If necessary withdraw the cable from the connector and plug it back in again. (Turn the power off before doing this.)

if the hum originates from a ground loop caused by an aerial, satellite dish or cable supply, you should contact your aerial contractor.

the signal (interconnect) leads are not wrapped around a mains lead.

try switching the ground lift on the back panel of the processor (if available).

THERE IS RADIO/TELEVISION RECEPTION INTERFERENCE

The P7 has been designed to a very high standards of electromagnetic compatibility.

Check that:

the aerial/dish cable is routed as far as possible from your P7 and its cabling.

the cabling used from the aerial/dish is of high quality and screened.

repositioning the receiving aerial/dish as far as possible from your P7 and its cabling may bring an improvement.

if the problem persists, contact your aerial contractor.

you are using high quality screened audio cable between your equipment and that no cables are broken or damaged.

10

Image 10
Contents Page Page Using this handbook ContentsImportant Safety Instructions Safety guidelinesSafety Compliance Introduction Speaker InstallationGetting started with your P7 CablesAnalogue Audio Inputs Connecting to a PRE-AMPLIFIERPositioning the Unit 12V Trigger InputMains Lead Connecting to LoudspeakersConnecting to a Power Supply Wrong PLUG?Operating your P7 Front Panel LayoutBeforeyou Start Bi-wiring and bi-amping loudspeakersBI-WIRINGYOUR Loudspeakers BI-AMPINGYOUR SystemTroubleshooting Fault Status Indicators LED status Description Amplifier actionContinual Improvement Policy Technical specificationsRadio Interference Guarantee On Line RegistrationPage Utilisation de ce manuel SécuritéConsignes de sécurité Conformité AUX Normes DE SécuritéPréparation du P7 CâblesEntrées Audio Analogiques Positionnement DE L’APPAREILRaccordement À UN Préamplificateur Entrée Trigger InputMauvaise Prise ? Branchement À UNE Source D’ALIMENTATIONCordon D’ALIMENTATION Raccordement AU RéseauSchéma DU Panneau Avant Fonctionnement de votre P7Procédure DE Fonctionnement BI-CÂBLAGE Devos HAUT-PARLEURS Bi-câblage et bi-amplification des haut-parleursAvent DE Commencer Vous avez besoin deDépannage Indicateurs D’ÉTAT D’ERREUR Etat de la LED Description Action de l’amplificateurInterférences Radio Spécifications techniquesPolitique D’AMÉLIORATION Continue 05% 20Hz-20kHz en général 0,005% at 1kHzGarantie Inscription EN LignePage Hinweise zum Handbuch SicherheitWichtige Sicherheitsanweisungen SicherheitsrichtlinienEinhaltungvon Sicherheitsbestimmungen Einführung Einstieg in Ihren P7Kabel ANALOG-AUDIO-EINGÄNGE Aufstellen DES GerätsVorverstärker 12V TRIGGER-EINGANGFalscher NETZSTECKER? StromversorgungNetzkabel AnschliessenSteuerelemente AN DER Vorderseite Bedienung des P7Betriebsablauf Befor SIE Anfangen Bi-Wiring und Bi-Amping der LautsprecherBI-WIRING Ihrer Lautsprecher SIE BenötigenFehlersuche Fehlerstatusanzeigen LED-Status Beschreibung VerstärkermaßnahmeStörgeräusche Technische DatenLaufende Verbesserungen NetzeingangWeltweite Garantie PROBLEME?ONLINE-REGISTRIERUNG DIE Garantie Umfasst FolgendesPage Gebruik van deze handleiding VeiligheidVeiligheidsvoorschriften VeiligheidsrichtlijnenVeiligheidsnaleving Inleiding DE Luidsprekers InstallerenAan de slag met de P7 KabelsAnaloge AUDIO-INGANGEN HET Apparaat OpstellenVerbinding Maken MET EEN Voorversterker 12V TRIGGER-INGANGVoedingskabel HET Apparaat Aansluiten OP DE VoedingVerkeerde STEKKER? DE Voedingskabel in HET Apparaat StekenIndelingvoorpaneelgebruiksprocedure De P7 gebruikenVoordat U Begint Bi-wiring en bi-amping van luidsprekersBI-WIRINGVAN UW Luidsprekers Een systeem met dubbele versterking instellenStoringen verhelpen Foutstatusaanduidingen Storing RADIO-ONTVANGST Technische specificatiesBeleid Gericht OP Voortdurende Verbetering ToevoerkabelUniversele Garantie PROBLEMEN?ONLINE-REGISTRATIE DE Garantie DektPage Page Pembroke AVENUE, WATERBEACH, Cambridge CB5 9QR, England

Multichannel Power Amplifier specifications

The Arcam Multichannel Power Amplifier stands out in the audio landscape, delivering exceptional performance and versatility for home theater and multi-room audio systems. Known for its hallmark sound quality, this amplifier is designed to elevate the listening experience, leveraging advanced technologies and premium components.

One of the primary features of the Arcam Multichannel Power Amplifier is its high power output, which allows it to drive even the most demanding speakers with ease. With multiple channels typically offering 100-200 watts per channel, the amplifier is capable of providing clear, dynamic sound across all frequencies. This high output ensures that users can enjoy a powerful cinematic experience without distortion, making it ideal for both music and movie playback.

Another key characteristic of the Arcam amplifier is its Class G amplification technology. Unlike traditional Class A or Class AB designs, Class G dynamically adjusts power supply voltages based on the signal level. This results in improved efficiency and lower heat generation while maintaining optimal audio fidelity. As a result, users benefit from enhanced performance during extended listening sessions without the risk of overheating.

The amplifier also incorporates advanced signal processing features, including high-quality DACs (Digital to Analog Converters) and extensive connectivity options. It supports various audio formats and protocols, allowing users to integrate it seamlessly into existing systems, whether utilizing HDMI, analog, or digital connections. This flexibility makes it compatible with a wide range of audio sources, from Blu-ray players to gaming consoles and streaming devices.

Moreover, the Arcam Multichannel Power Amplifier features robust build quality with premium components designed for longevity and reliability. The use of high-grade capacitors, heatsinks, and sturdy chassis construction ensures that the amplifier can withstand rigorous use in diverse environments.

In terms of usability, it often includes features like trigger inputs, remote control operation, and automated standby modes for convenience. User-friendly interfaces and capabilities allow users to customize their listening experience, enhancing their engagement with the audio content.

In summary, the Arcam Multichannel Power Amplifier represents a pinnacle of audio engineering, combining powerful performance, innovative technologies, and user-friendly features. It is an ideal choice for audiophiles and home theater enthusiasts seeking an amplifier that delivers rich, immersive sound quality across multiple channels, while maintaining efficiency and reliability.