Safety guidelines

CAUTION	ATTENTION

RISK OF ELECTRIC	RISQUE DE CHOC ELECTRIQUE
SHOCK DO NOT OPEN	NE PAS OUVRIR

CAUTION:To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing to qualified service personnel.

WARNING:To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

CAUTION: In Canada and the USA, to prevent electric shock, match the wide blade of the plug to the wide slot in the socket and insert the plug fully into the socket.

IMPORTANT SAFETY INSTRUCTIONS

This product is designed and manufactured to meet strict quality and safety standards. However, you should be aware of the following installation and operation precautions:

1.Take heed of warnings and instructions

You should read all the safety and operating instructions before operating this appliance. Retain this handbook for future reference and adhere to all warnings in the handbook or on the appliance.

2.Water and moisture

The presence of electricity near water can be dangerous. Do not use the appliance near water – for example next to a bathtub, washbowl, kitchen sink, in a wet basement or near a swimming pool, etc.

3. Object or liquid entry

Take care that objects do not fall and liquids are not spilled into the enclosure through any openings. Liquid filled objects such as vases should not be placed on the equipment.

4.Ventilation

Do not place the equipment on a bed, sofa, rug or similar soft surface, or in an enclosed bookcase or cabinet, since ventilation may be impeded. We recommend a minimum distance of 50mm (2 inches) around the sides and top of the appliance to provide adequate ventilation.

5. Heat

Locate the appliance away from naked flames or heat producing equipment such as radiators, stoves or other appliances (including other amplifiers) that produce heat.

6. Climate

The appliance has been designed for use in moderate climates.

7. Racks and stands

Only use a rack or stand that is recommended for use with audio equipment. If the equipment is on a portable rack it should be moved with great care, to avoid overturning the combination.

8. Cleaning

Unplug the unit from the mains supply before cleaning.

The case should normally only require a wipe with a soft, damp, lint- free cloth. Do not use paint thinners or other chemical solvents for cleaning.

We do not advise the use of furniture cleaning sprays or polishes as they can cause indelible white marks if the unit is subsequently wiped with a damp cloth.

9. Power sources

Only connect the appliance to a power supply of the type described in the operating instructions or as marked on the appliance.

10. Power-cord protection

Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and plugs, and the point where they exit from the appliance.

11. Grounding

Ensure that the grounding means of the appliance is not defeated.

12. Power lines

Locate any outdoor antenna/aerial away from power lines.

13. Non-use periods

If the unit has a standby function, a small amount of current will continue to flow into the equipment in this mode. Unplug the power cord of the appliance from the outlet if left unused for a long period of time.

14.Abnormal smell

If an abnormal smell or smoke is detected from the appliance, turn the power off immediately and unplug the unit from the wall outlet. Contact your dealer immediately.

15. Servicing

You should not attempt to service the appliance beyond that described in this handbook. All other servicing should be referred to qualified service personnel.

16. Damage requiring service

The appliance should be serviced by qualified service personnel when:

A.the power-supply cord or the plug has been damaged, or

B.objects have fallen, or liquid has spilled into the appliance, or

C.the appliance has been exposed to rain, or

D.the appliance does not appear to operate normally or exhibits a marked change in performance, or

E.the appliance has been dropped or the enclosure damaged.

17.Lifting the unit

This amplifier weighs 31kg, so take extreme care when lifting or moving this unit.We recommend that two people are available to lift this unit.

SAFETY COMPLIANCE

This product has been designed to meet the IEC 60065 international electrical safety standard.

Multichannel Power Amplifier specifications

The Arcam Multichannel Power Amplifier stands out in the audio landscape, delivering exceptional performance and versatility for home theater and multi-room audio systems. Known for its hallmark sound quality, this amplifier is designed to elevate the listening experience, leveraging advanced technologies and premium components.

One of the primary features of the Arcam Multichannel Power Amplifier is its high power output, which allows it to drive even the most demanding speakers with ease. With multiple channels typically offering 100-200 watts per channel, the amplifier is capable of providing clear, dynamic sound across all frequencies. This high output ensures that users can enjoy a powerful cinematic experience without distortion, making it ideal for both music and movie playback.

Another key characteristic of the Arcam amplifier is its Class G amplification technology. Unlike traditional Class A or Class AB designs, Class G dynamically adjusts power supply voltages based on the signal level. This results in improved efficiency and lower heat generation while maintaining optimal audio fidelity. As a result, users benefit from enhanced performance during extended listening sessions without the risk of overheating.

The amplifier also incorporates advanced signal processing features, including high-quality DACs (Digital to Analog Converters) and extensive connectivity options. It supports various audio formats and protocols, allowing users to integrate it seamlessly into existing systems, whether utilizing HDMI, analog, or digital connections. This flexibility makes it compatible with a wide range of audio sources, from Blu-ray players to gaming consoles and streaming devices.

Moreover, the Arcam Multichannel Power Amplifier features robust build quality with premium components designed for longevity and reliability. The use of high-grade capacitors, heatsinks, and sturdy chassis construction ensures that the amplifier can withstand rigorous use in diverse environments.

In terms of usability, it often includes features like trigger inputs, remote control operation, and automated standby modes for convenience. User-friendly interfaces and capabilities allow users to customize their listening experience, enhancing their engagement with the audio content.

In summary, the Arcam Multichannel Power Amplifier represents a pinnacle of audio engineering, combining powerful performance, innovative technologies, and user-friendly features. It is an ideal choice for audiophiles and home theater enthusiasts seeking an amplifier that delivers rich, immersive sound quality across multiple channels, while maintaining efficiency and reliability.