JVC WR-MG250, LYT2112-003A Storing the O-ring, Specifications, Applicable camera models

Page 11

Caution

zThe front glass will fog if it is dirty.

HLet it dry completely in a shaded area.

Caution

zDo not leave the marine case in direct sunlight.

zDoing so may cause discoloration of the case, and may cause the O-ring to deteriorate more quickly.

Note

zThe conditions may vary depending on the environment of use such as temperature, humidity, water temperature, salinity and others.

Storing the O-ring

If you do not intend to use the marine case for longer than one month, remove and store the O-ring away.

¹For details, refer to the “O-ring Maintenance Manual”.

The O-ring is an expendable part. Replace the O-ring with a brand new one every year.

Caution

zWhen re-using an O-ring after storage, always check the condition of the O-ring. Never use an O-ring if it is deformed (crushed, distorted), cracked, or damaged in any way.

Specifications

Maximum

Water depth up to 40 meters

pressure

 

Operations

Power on/off

 

Video recording start/stop

 

Still image shooting

 

Zoom (tele/wide)

Buoyancy

+440 g, with the camera

 

(GZ-HD300, 320) inserted

 

and the supplied battery pack

 

attached

 

+460 g, with the camera

 

(GZ-MG840, 880) inserted

 

and the supplied battery pack

 

attached

Filter diameter

67 mm

Main unit

216 mm x 179 mm x 128 mm

dimensions

 

(W x D x H)

 

Main unit weight

Approx. 850 g

 

(excluding grip)

 

 

o Applicable camera models

GZ-HD300 GZ-MG840

GZ-HD320 GZ-MG880

11

Image 11
Contents WR-MG250 Order to use this product safely Safety PrecautionMaintenance Kit Sold Separately Part Number MG100MTKIT AccessoriesDrying agent Procedures for Using the Supplied Maintenance KitStrap Anti-fog liquidScrew tightening key Silicone clothHexagonal wrench small Buckle openerPreparation Parts and FunctionsAttaching the Marine Case to the Camera Before recording Recording the Video/Still Image FilesIf there is no need to detach immediately Perform maintenance on the marine case. a PgDetaching the camera If there is a need to detach immediatelyPerforming salt removal Maintenance on the marine caseWash the marine case in water while it is still sealed Let it dry completely in a shaded area SpecificationsStoring the O-ring Applicable camera modelsWR-MG250 型環維護手冊 Remove the O-ring As a general rule, each time before usingJCracks JDistortion JCrushed JFrayed JNicks JSand corrosion Wipe off any residual greaseJDirt JSand JHair JDust JSalt JLint Check for any foreign matter in the O-ring groove Apply silicone grease on the O-ring¹ Do not store in hot and humid locations Insert the O-ring after inspectionКольцом Drastic change in water pressure Temperature and humidity during camera mountingTemperature difference during shooting Moisture inside marine case