JVC WR-MG250 Silicone cloth, Hexagonal wrench small, Buckle opener, Screw tightening key

Page 5

Silicone cloth

Wash the marine case with fresh water, and wipe the outer side of the whole case with the silicone cloth after drying.

Buckle

Base

Grip belt of camera

Use the key to tighten the screw of the base.

Image 5

Contents WR-MG250 Order to use this product safely Safety PrecautionMaintenance Kit Sold Separately Part Number MG100MTKIT AccessoriesStrap Procedures for Using the Supplied Maintenance KitAnti-fog liquid Drying agentHexagonal wrench small Silicone clothBuckle opener Screw tightening keyPreparation Parts and FunctionsAttaching the Marine Case to the Camera Before recording Recording the Video/Still Image FilesDetaching the camera Perform maintenance on the marine case. a PgIf there is a need to detach immediately If there is no need to detach immediatelyPerforming salt removal Maintenance on the marine caseWash the marine case in water while it is still sealed Storing the O-ring SpecificationsApplicable camera models Let it dry completely in a shaded areaWR-MG250 型環維護手冊 Remove the O-ring As a general rule, each time before usingJCracks JDistortion JCrushed JFrayed JNicks JSand corrosion Wipe off any residual greaseJDirt JSand JHair JDust JSalt JLint Check for any foreign matter in the O-ring groove Apply silicone grease on the O-ring¹ Do not store in hot and humid locations Insert the O-ring after inspectionКольцом Temperature difference during shooting Temperature and humidity during camera mountingMoisture inside marine case Drastic change in water pressure