JVC LYT2112-003A Procedures for Using the Supplied Maintenance Kit, Strap, Anti-fog liquid

Page 4

Procedures for Using the Supplied Maintenance Kit

Strap

Pass the strap through the strap attachment hole before using the marine case to maintain a firm grip in water.

Anti-fog liquid			Front glass
		Apply the anti-fog liquid on the	Front glass


		inner side of front glass before
		using the marine case.
		Add two to three drops of the
		liquid on a lens tissue paper
		(commercially available) or a
		clean cloth, and apply on the inner
		side of the front glass.

Marine case

Drying agent

Prevents fogging inside the marine case. Insert it at the back of the base attached to the camera.

¹The moisture absorption ability of drying agent that has previously been used may deteriorate depending on the conditions of use. As such, we recommend that the drying agent be replaced each time.

4

Image 4

Contents WR-MG250 Safety Precaution Order to use this product safelyAccessories Maintenance Kit Sold Separately Part Number MG100MTKITProcedures for Using the Supplied Maintenance Kit StrapAnti-fog liquid Drying agentSilicone cloth Hexagonal wrench smallBuckle opener Screw tightening keyParts and Functions PreparationAttaching the Marine Case to the Camera Recording the Video/Still Image Files Before recordingPerform maintenance on the marine case. a Pg Detaching the cameraIf there is a need to detach immediately If there is no need to detach immediatelyWash the marine case in water while it is still sealed Maintenance on the marine casePerforming salt removal Specifications Storing the O-ringApplicable camera models Let it dry completely in a shaded areaWR-MG250 型環維護手冊 As a general rule, each time before using Remove the O-ringJDirt JSand JHair JDust JSalt JLint Wipe off any residual greaseJCracks JDistortion JCrushed JFrayed JNicks JSand corrosion Apply silicone grease on the O-ring Check for any foreign matter in the O-ring grooveInsert the O-ring after inspection ¹ Do not store in hot and humid locationsКольцом Temperature and humidity during camera mounting Temperature difference during shootingMoisture inside marine case Drastic change in water pressure