JVC WR-MG250 Insert the O-ring after inspection, ¹ Do not store in hot and humid locations

●Insert the O-ring after inspection

Make sure no foreign matter is adhered when placing the greased O-ring back to the groove.

Do not pull too strongly, and make sure the O-ring is placed evenly and not twisted.

<POINT>

Insert from the four diagonal corners and smooth out evenly.

3

1

2

5

4

Storing the O-ring

●If you do not intend to use the marine case for a long period of time, remove the O-ring and allow it to rest.

A Remove the O-ring.

¹Be sure to use the pick supplied.

B Wipe off the grease gently.

C Check for any foreign matter that might be adhered to it.

D Put the O-ring inside a clean plastic bag, and store in a way that it will not be subject to stress.

¹Do not put in moth balls and other insect repellents.

¹Do not leave the O-ring as-is in the marine case for a long period of time.

It may deform due to heat and pressure resulting from the locked and tightened state.

¹Do not store in hot and humid locations.

This will cause the O-ring to deteriorate more quickly.

5