1. Introduction (continued)
Part names and their functions (continued)
[Rear (continued)]
Ventilation hole
SCSI
REC
SEND AW/SEL MODE
@ @ @ @ @ @
MENU
MONITOR 
UP DOWN SET
PLAY
FREEZE
LENS |
REMOTE
ON 1 2 3 4
DC IN
POWER
SEE INSTRUCTION MANUAL
IMODE/SET button
●[MODE]
Pressing this button each time will switch between the REC (record)* and PLAY
(playback) modes. The default mode when the power is turned on is REC.
* REC mode is the condition which the unit has either captured an image or is ready to write an image to the main unit memory.
Recording images to the main unit memory ( ☞ page 34)
Playing back images from the memory ( ☞ page 35)
●[SET]
While the menu screen is being displayed, use this button to select a submenu or confirm a selected item or set value.
Setting in the menu screen ( ☞ page 44)
JREC display lamp
This lamp lights when in the REC* mode. During FREEZE, this display lamp will flash.
*During the REC mode, camera images are outputted to the MONITOR terminal. Pressing the FREEZE button at this time will save the image to the main unit memory.
KPLAY display lamp
This lamp lights when in the PLAY* mode. * During the PLAY mode, images saved in the main unit memory are played back by outputting to the MONITOR terminal. Playing back images from the memory ( ☞
page 35)