JVC KY-F70 manual Monitor adjustment, E28, Turn the main unit power on Adjust the video monitor

Page 28

3. Settings and adjustments for recording (continued)

Monitor adjustment

The color contrast, brightness, etc. are adjusted by sending built-in color bar signals of the main unit to the PC monitor.

MONITOR terminal

SCSI

REC

SEND AW/SEL MODE

MENU UP DOWN SET

@ @@ @ @ @PLAY

FREEZE

MONITOR LENS

REMOTE	DC IN
ON 1 2 3 4	POWER

SEE INSTRUCTION MANUAL

Dip switches

1. Depending on the system, set the MONITOR mode to VGA or SXGA.

(Set using the main unit dip switches) Monitor settings ( ☞ page 24)

2. Connect the monitor and MONITOR terminal.

3. Set dip switches 3 and 4 on the rear of the main unit to ON.

ON 1 2 3 4

MEMO

Turn the power off before setting the dip switches. Setting the switches with the power on will not change the settings.

4.

5.

Turn the main unit power on.

Adjust the video monitor.

MEMO

•For the adjustment method, see the instruction manual of the video monitor.

•The peak level of the color bar is et to 0.7V. To change the setting to 0.58V, select BAR LEVEL in the SYSTEM SET- TING screen ( ☞ Page 58).

6.When completed, turn off the system power., then set dip switch 4 to OFF.

E28

Image 28

Contents Illustration with optional lens attachment This instruction book is made from 100% recycled paperSafety Precautions Varning Table of Contents Characters and symbols used in this instruction book MemoAccessories and attachments FeaturesIntroduction Line and patterns may appear distorted when recorded Phenomena unique to CCDPart names and their functions Front and bottomRear Mode E10Ventilation hole E11 This lamp lights when the power of the main unit is onUsed to connect the lens cable Mounting the lens Remoter terminal Metal 10-pin, female Explanation of terminalsE12 E13 For the power supply, always use the AA-P700 AC adapter Before recordingBasic system E14E15 AC adapterMO disk drive Model name AdapterE16 InstallScrews Female Lens remote control Mounting the lensE17 Camera head Male Thread section Mount clamp ring LensConnecting the power Clamp filter Attached power supply cableE18 AC adapterE19 Connecting a monitorMonitor terminal Connecting an MO drive unit E20Scsi Do not set the ID of the MO drive side to other thanConnecting a printer Dip switchesE21 Scsi Set the ID of the printer side to other thanMounting the camera Mounting methodChanging the camera mounting bracket position E22Fall prevention Fall prevention wire chain 6mm Camera headE23 E24 Minal on the rear of the main unitSet to OFF Set to onMenu settings VGA mode settingsLens settings VGA mode and lens settings are made from the menu screenTime and date settings Time Adjust screenE26 Play menu screenE27 OK display screenMonitor adjustment Turn the main unit power on Adjust the video monitorSet using the main unit dip switches Monitor settings E28E29 Focus adjustmentPress the Menu button to return to the normal screen White balance adjustment E30REC Menu screen Menu item Set value White Balance screenAuto white in operation E31Auto white operation completed E32 White shading adjustmentREC Menu screen E33 Basic operations Recording images to the main unit memoryE34 Freeze displayReturning to the REC mode Press the Mode button to enter the Play modePlaying back images from the memory E35Saving images from the memory to an MO disk E36Set to either the Freeze or Play mode Outputting images from the memory to a printerUse a printer with an Scsi input terminal E37E38 Clearing images from the memoryVideo Memory Clear E39 Memory clearedRecording a PC monitor Various recording methodsE40 Outputting negative images System Setting screenE41 Timing chart Sxga mode Synchronizing flash and FreezeE42 High speed shutter onlyAbout ALC and EEI operations E43Menu screen flow Menu screen settingsE44 E45 Exposure screenFreeze screen Process screenSetting procedure REC normal menu screenE46 REC normal menu screen Menu item Set valueAbout the submenu screens of the normal REC menu Play menu screenREC quick menu screen E47Exposure screen E48E49 E50 White Balance screen E51Mode OFF E52Shading Level GProcess 1/3 screen Freeze screenE53 @ADJUST set when changing the gamma curve E54Gamma Used to set whether the gamma curve to determineProcess 2/3 screen E55Flare R Flare BE56 ColorMatrix Standard valueSystem Setting screen E57E58 Menu screen of the Play mode E59Send Prioryty Video ME.MORYREC mode quick menu screen E60Menu item TorSensitivity can be changed when the sensitivity mode Sensitivity can be changed using the Level Submenu itemE61 Resetting settings Menu Reset screen SET buttonResetting E62E63 Press the Menu once more to return to the normal screenConnecting to a PC Camera remote control softwareCompatible systems E64E65 Printer Flash Freeze switchAC adapter Analog RGB, WEN, Hs, Vs, RS-232C Others SpecificationsE66 E67 External dimensions unit mmInch screw SL96172