JVC KY-F70 manual E11, Used to connect the lens cable Mounting the lens

Page 11

LFREEZE button

While in the REC mode, press this button to capture a still image (freeze) of the im- ages being outputted through the MONI- TOR terminal. At the same time, the still image is saved to the main unit memory. Pressing this button once more will cancel the still image and return to the camera images.

Saving images to the main unit memory ( ☞ page 34)

MEMO

You can also set the unit to automatically can- cel the still image after 5 seconds.

FREEZE screen, CANCEL screen ( ☞ page 53)

MMONITOR output terminal (D-sub 15-pin, female)

Used to connect to a VGA monitor or SXGA compatible capture board.

The default setting is set to VGA monitor compatible.To change the setting from VGA mode to SXGA mode, change the dip switch settings.

Setting the monitor ( ☞ page 24)

●When in the SXGA mode, images of 1360 × 1024 pixles (7.5 frames/sec.) are

outputted.

●For the VGA mode, you can select be- tween the FINE mode of 640 × 480 pix-

els (7.5 frames/sec.) or DRAFT mode of

640 × 240 pixels (30 frames/sec.) in the menu screen.

Setting the VGA mode ( ☞ page 25)

NLENS connection terminal

Used to connect the lens cable.

Mounting the lens ( ☞ page 17)

OPOWER display lamp

This lamp lights when the power of the main unit is on.

PDC IN power input terminal

(Mini DIN 8-pin, female)

Main unit power supply (DC 12V) is sup- plied through this terminal.

For the power supply, use the AA-P700 AC adapter.

Connecting the power ( ☞ page 18)

QREMOTE terminal (Metal 10-pin, female)

Used to connect external devices such as a freeze switch or flash unit.

5. Various recording methods ( ☞ page 40)

RDip switches

Used to set the SCSI ID ( ☞ page 24) and monitor ( ☞ page 24), and output color bar ( ☞ page 28).

SSCSI terminal (Half-pitch 50-pin × 2)

Used to directly output to an MO drive ( ☞ page 20) or printer ( ☞ page 21).

The default setting of the SCSI ID is 7. Change the SCSI ID setting when connect- ing to a PC, etc.

Connecting to a PC ( ☞ page 64)

E11

Image 11

Contents This instruction book is made from 100% recycled paper Illustration with optional lens attachmentSafety Precautions Varning Table of Contents Memo Characters and symbols used in this instruction bookIntroduction FeaturesAccessories and attachments Phenomena unique to CCD Line and patterns may appear distorted when recordedFront and bottom Part names and their functionsRear Ventilation hole E10Mode Used to connect the lens cable Mounting the lens This lamp lights when the power of the main unit is onE11 E12 Explanation of terminalsRemoter terminal Metal 10-pin, female E13 E14 For the power supply, always use the AA-P700 AC adapterBefore recording Basic systemAdapter E15AC adapter MO disk drive Model nameScrews InstallE16 Camera head Male Thread section Mount clamp ring Lens Female Lens remote controlMounting the lens E17AC adapter Connecting the powerClamp filter Attached power supply cable E18Monitor terminal Connecting a monitorE19 Do not set the ID of the MO drive side to other than Connecting an MO drive unitE20 ScsiScsi Set the ID of the printer side to other than Connecting a printerDip switches E21E22 Mounting the cameraMounting method Changing the camera mounting bracket positionE23 Fall prevention wire chain 6mm Camera headFall prevention Set to on E24Minal on the rear of the main unit Set to OFFVGA mode and lens settings are made from the menu screen Menu settingsVGA mode settings Lens settingsPlay menu screen Time and date settingsTime Adjust screen E26OK display screen E27E28 Monitor adjustmentTurn the main unit power on Adjust the video monitor Set using the main unit dip switches Monitor settingsPress the Menu button to return to the normal screen Focus adjustmentE29 White Balance screen White balance adjustmentE30 REC Menu screen Menu item Set valueAuto white operation completed E31Auto white in operation REC Menu screen White shading adjustmentE32 E33 Freeze display Basic operationsRecording images to the main unit memory E34E35 Returning to the REC modePress the Mode button to enter the Play mode Playing back images from the memoryE36 Saving images from the memory to an MO diskE37 Set to either the Freeze or Play modeOutputting images from the memory to a printer Use a printer with an Scsi input terminalVideo Memory Clear Clearing images from the memoryE38 Memory cleared E39E40 Various recording methodsRecording a PC monitor E41 System Setting screenOutputting negative images High speed shutter only Timing chart Sxga modeSynchronizing flash and Freeze E42E43 About ALC and EEI operationsE44 Menu screen settingsMenu screen flow Process screen E45Exposure screen Freeze screenREC normal menu screen Menu item Set value Setting procedureREC normal menu screen E46E47 About the submenu screens of the normal REC menuPlay menu screen REC quick menu screenE48 Exposure screenE49 E50 E51 White Balance screenLevel G Mode OFFE52 ShadingE53 Freeze screenProcess 1/3 screen Used to set whether the gamma curve to determine @ADJUST set when changing the gamma curveE54 GammaFlare B Process 2/3 screenE55 Flare RStandard value E56Color MatrixE57 System Setting screenE58 Video ME.MORY Menu screen of the Play modeE59 Send PriorytyTor REC mode quick menu screenE60 Menu itemE61 Sensitivity can be changed using the Level Submenu itemSensitivity can be changed when the sensitivity mode E62 Resetting settingsMenu Reset screen SET button ResettingPress the Menu once more to return to the normal screen E63E64 Connecting to a PCCamera remote control software Compatible systemsAC adapter Analog RGB, WEN, Hs, Vs, RS-232C Printer Flash Freeze switchE65 E66 SpecificationsOthers Inch screw External dimensions unit mmE67 SL96172