JVC GR-DVM5 manual Grip Adjustment, Language Settings, Power-Linked Operation

CAMERA DISPLAY BRIGHT

ON SCREEN – LCD / T V DATE / T I ME – AUTO T I ME CODE – OFF LANGUAGE – ENGLISH

AUX M I C – ON

CLOCK 2 0. 1 2 . 0 5

ADJ .1 7 : 3 0

			GETTING STARTED EN 15
VIDEO/MEMORY Switch Position			Date/Time Settings
VIDEO:			The date/time is recorded onto the tape at all
Allows you to record on a tape or play back a
			times, but its display can be turned on or off
tape. If “REC SELECT” is set to “	/	”
			during playback. ( pg. 31, 36)
( pg. 35), still images are recorded both on
			1 Perform steps 1 – 4 in “Language Settings”
the tape and the memory card.
MEMORY:			on the left column.
● Allows you to record in a memory card or			2 Press + or – to select “CLOCK ADJ.”, and
access data stored in a memory card.			press MENU. The parameter for “Day” is
● When the Power Switch is set to “A” or “M”,			highlighted.
the currently selected image size appears.			3 Press + or – to input	CAMERA DISPLAY
Power-Linked Operation
			the day, and press MENU.
When the Power Switch is set to “A” or “M”, you			Repeat to input the month,
			year, hour and minute.
can also turn on/off the camcorder by opening/			4 Press + or – to select	CLOCK	2 0. 1 2 . 0 5
closing the LCD monitor or pulling out/pushing in				ADJ .	1 7 : 3 0
the viewfinder.			“BRETURN”, and press
			MENU twice. The Menu
INFORMATION:
			Screen closes.
The following explanations in this manual			Grip Adjustment
supposes the use of LCD monitor in your
operation. If you want to use the viewfinder,			1 Adjust the velcro strip.
close the LCD monitor and pull out the
viewfinder fully.			2 Pass your right hand
Language Settings			through the loop and grasp
			the grip.
The language on the display can be changed.			3 Adjust your thumb and
( pg. 31, 34, 36)			fingers through the grip to
1 Set the Power Switch to “M” while pressing			easily operate the
			Recording Start/Stop
down the Lock Button located on the switch.			Button, Power Switch and
2 Open the LCD monitor fully. ( pg. 18)
			Power Zoom Lever. Be
3 Press MENU. The Menu Screen appears.			sure to fasten the velcro strip to your preference.
4 Press + or – to select
“n”, and press MENU.

The CAMERA DISPLAY

Menu appears.

GETTING STARTED

5 Press + or – to select “LANGUAGE”, and press MENU.

6 Press + or – to select the desired language, and press MENU.

7 Press + or – to select “BRETURN”, and press MENU twice. The Menu Screen closes.

RETURN

CAMERA DISPLAY

LANGUAGE –

ENGLISH

РУССКИЙ