JVC GR-DVM5 manual Beep, Tele Macro, Remote Wide Mode, Demo Mode, Wind CUT

					MENUS FOR DETAILED ADJUSTMENT			EN 33
							SYSTEM
5S
[OFF]: Disables 5-Second Recording.						The “s SYSTEM” functions which are set when
5S: Enables 5-Second Recording. ( pg. 37)						the Power Switch is set to “M” are also applied
Anim.: Allows you to record a few frames only.						when the Power Switch is set to “PLAY”.
By using an inanimate object and changing its						[ ] = Factory-preset
position between shots, you can record the
subject as though it is moving.						BEEP
						OFF: Even though not heard while shooting,
TELE MACRO
						shutter sound is recorded on the tape.
[OFF]: Disables the function.
						BEEP: The beep sounds when the power is
ON: When the distance to the subject is less						turned on or off, and at the beginning and end of
than 1 m, set “TELE MACRO” to “ON”. You can						recording. It also activates the shutter sound
shoot a subject as large as possible at a						effect. ( pg. 25, 38)
distance of approx. 40 cm.						[MELODY]: Instead of a beep, a melody sounds
NOTE:						when any operation is performed. It also
						activates the shutter sound effect.
Depending on the zoom position, the lens may go out
						( pg. 25, 38)
of focus.
						REMOTE
WIDE MODE
[OFF]: Records with no change in the screen						OFF: Disables the remote control operations.
						[ON]: Enables the remote control operations.
ratio. For playback on a TV with a normal screen
ratio.
						DEMO MODE
CINEMA* : Inserts black bands at the top and
						OFF: Automatic demonstration will not take
bottom of the screen. The				indicator appears.
During playback on wide-screen TVs, the black						place.
bands at the top and bottom of the screen are						[ON]: Demonstrates certain functions such as
cut and the screen ratio becomes 16:9. When						Program AE with special effects, etc., and can
using this mode, refer to your wide-screen TV’s						be used to confirm how these functions operate.
instruction manual. During playback/recording						Demonstration starts in the following cases:
on 4:3 TVs/LCD monitor/viewfinder, black bands						● When the Menu Screen is closed after “DEMO
are inserted at the top and bottom of the screen						MODE” is turned “ON”.
and the image appears like a letter boxed 16:9						● With “DEMO MODE” set to “ON”, if there is no
						operation for about 3 minutes after the Power
movie.
						Switch is set to “A” or “M”.
SQUEEZE*			: For playback on TVs with an
						● Performing any operation during the
aspect ratio of 16:9. Naturally expands the
						demonstration stops the demonstration
image to fit the screen without distortion. The
						temporarily. If no operation is performed for more
	indicator appears. When using this mode,
						than 3 minutes after that, the demonstration will
refer to your wide-screen TV’s instruction
						resume.
manual. During playback/recording on 4:3 TVs/
						NOTES:
LCD monitor/viewfinder, the image is elongated
vertically.						● If a cassette is in the camcorder, the
* Available only when the VIDEO/MEMORY Switch						demonstration cannot be turned on.
						● “DEMO MODE” remains “ON” even if the
is set to “VIDEO”.
						camcorder power is turned off.
WIND CUT						● If “DEMO MODE” remains “ON”, some functions
[OFF]: Disengages the function.						will not be available. After viewing demo, set to
						“OFF”.
ON		: Helps cut down on noise created by

wind. The “ ” indicator appears. The quality of the sound will change. This is normal.

ADVANCED FEATURES