30 EN ADDITIONAL FEATURES FOR D.S.C.
5 Press + or – to select
“EXECUTE”, and press | DPOF |
| |
MENU. The normal |
|
playback screen appears. | AL L 1 ? |
● To cancel selection, select |
|
EXECUTE | |
“RETURN”. | RETURN |
To Print By Selecting Still Images And Number Of Prints
To Reset The Number Of Prints
1 Perform steps 1 – 3 in “To Print All Still Images (One Print For Each)”.
2 Press + or – to select “RESET”, and press MENU. The DPOF screen appears.
3 Press + or – to select “EXECUTE”, and press MENU. The normal playback screen appears.
● To cancel selection, select “RETURN”. |
● The number of prints is reset to 0 for all still |
1 Perform steps 1 – 3 in “To Print Images (One Print For Each)”.
2 Press + or – to select “CURRENT”, and press MENU. The DPOF screen appears.
All Still
DPOF
SHEETS
images. |
CAUTION:
While performing the above, never disconnect power, as this may cause the memory card to be corrupted.
3 Slide the Power Zoom | RETURN |
| 0 0 |
Lever towards “T” or “W” to |
|
| |
select the desired file. |
|
4 Press + or – to select the number indication (00), and press MENU.
5 Select the number of
prints by pressing + to | DPOF | ||
|
|
| |
increase the number, or – |
|
|
|
to decrease the number, | SHEETS | ||
and press MENU. |
|
|
|
0 5 |
| ||
● Repeat steps 3 through 5 |
|
|
|
for the desired number of |
|
|
|
prints. |
|
|
|
●The number of prints can be set up to 15.
●To correct the number of prints, select the image again and change the number.
6 Press + or – to select
“RETURN”, and press | DPOF |
| |
MENU. The “SAVE?” |
|
appears. | SAVE? |
● If you did not change any |
|
EXECUTE | |
settings in step 3 through | CANCEL |
5, the Menu Screen |
|
reappears. |
|
7 Press + or – to select “EXECUTE” to save the setting you have just made, and press MENU.
●To cancel selection, select “CANCEL”.
Initialising A Memory Card
You can initialise a memory card any time. After initialising, all files and data stored in the memory card, including those which have been protected, are cleared.
1 Set the VIDEO/MEMORY Switch to “MEMORY”.
2 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
3 Press MENU. The Menu Screen appears.
4 Press + or – to select |
| FORMAT | ||
“FORMAT”, and press | ERASE AL L | |||
MENU. The FORMAT | ||||
EX I ST I NG DATA? | ||||
screen appears. |
|
|
| |
5 Press + or – to select |
|
|
| |
| EXECUTE | |||
| RETURN | |||
“EXECUTE”, and press |
| |||
|
|
| ||
MENU. The memory card |
|
|
| |
is initialised. |
|
|
| |
●When initialisation is finished, “NO IMAGES STORED” appears.
●To cancel initialisation, select “RETURN”.
CAUTION:
Do not perform any other operation (such as turning off the camcorder) during initialisation. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during initialisation. If the memory card becomes corrupted, initialise it.