JVC GR-DVM5 manual Recording Menus, EN Menus for Detailed Adjustment

Page 32

32 EN MENUS FOR DETAILED ADJUSTMENT

Recording Menus

CAMERA

The “m CAMERA” settings are effective when the Power Switch is set to both “A” and “M”. However, the menu settings can be changed only when the Power Switch is set to “M”.

[ ] = Factory-preset

REC MODE

SNAP/SLOW

[FULL]: Snapshot mode with no frame

NEGA: Nega mode

PIN-UP: Pin-Up mode

FRAME: Snapshot mode with frame

SLOW: Live Slow mode

[FULL] NEGA PIN-UP FRAME

[SP]: To record in the SP (Standard Play) mode

LP: Long Play—more economical, providing 1.5 times the recording time.

NOTES:

Audio Dubbing ( pg. 46) and Insert Editing

( pg. 46) are possible on tapes recorded in the SP mode.

If the recording mode is switched, the playback picture will be blurred at the switching point.

It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder.

During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.

SOUND MODE

[12BIT]: Enables video recording of stereo sound on four separate channels, and is recommended for use when performing Audio Dubbing. (Equivalent to the 32 kHz mode of previous models)

16BIT: Enables video recording of stereo sound on two separate channels. (Equivalent to the 48 kHz mode of previous models)

ZOOM

25X: When set to “25X” while using digital zoom, the zoom magnification will reset to 25X since digital zoom will be disengaged.

[100X]*: Allows you to use the Digital Zoom. By digitally processing and magnifying images, zooming is possible from 25X (the optical zoom limit), to a maximum of 100X digital magnification.

800X*: Allows you to use the Digital Zoom. By digitally processing and magnifying images, zooming is possible from 25X (the optical zoom limit), to a maximum of 800X digital magnification.

For details on the procedure, refer to “Live Slow” ( pg. 37) and “Snapshot (For Video Recording)” ( pg. 38).

GAIN UP

OFF: Allows you to shoot dark scenes with no picture brightness adjustment.

[AGC]: The overall appearance may be grainy, but the image is bright.

AUTO : The shutter speed is automatically adjusted. Shooting a subject in low or poor lighting at slow shutter speed provides a brighter image than in the AGC mode, but the subject’s movements are not smooth or natural. The overall appearance may be grainy. While the shutter speed is being automatically adjusted,

” is displayed.

MANUAL

The “q MANUAL” settings are effective only when the Power Switch is set to “M”.

[ ] = Factory-preset

DIS

OFF: Disables the function.

[ON ]: To compensate for unstable images caused by camera-shake, particularly at high magnification.

NOTES:

Accurate stabilisation may not be possible if hand shake is excessive, or depending on the shooting condition.

The “ ” indicator blinks or goes out if the Stabiliser cannot be used.

Switch off this mode when recording with the camcorder on a tripod.

*Available only when the VIDEO/MEMORY Switch is set to “VIDEO”.

Image 32
Contents Digital Still Camera D.S.C. Recording Dear CustomerData Battery Wipe/Fader EffectsProgram AE with Special Effects LED LightSafety Precautions Page References Index EN Getting StartedConnectors IndicatorsControls Other PartsBright During D.S.C. Recording OnlyInterval During Video Playback During D.S.C. PlaybackMIC BR I GHTBefore Using This Camcorder How To Attach The Shoulder Strap Provided AccessoriesHow To Attach The Lens Cap How To Attach The Core Filter Close the core filter until it clicks shutStopper Core filter Wind oncePower Charging The Battery PackUsing The Battery Pack Maximum continuous recording timeOperation Mode Data Battery SystemUsing AC Power About BatteriesPower-Linked Operation Grip AdjustmentLanguage Settings Tripod Mounting Viewfinder AdjustmentBrightness Adjustment Of The Display Card To protect valuable recordingsClose the card cover To protect valuable files available only for SD Memory CardBasic Recording EN Video RecordingTape Remaining Time LCD Monitor And ViewfinderZooming Journalistic Shooting Time CodeZoom Zoom OutTo control the speaker volume Normal PlaybackQuick Review Video PlaybackBlank Search Video Playback ENShuttle Search EN Video Playback If using a VCR, go to . If not, go to stepTo AV connector AV cable provided Open the cover. mark Installing The Battery ControlBeam Effective Area indoor use Buttons And FunctionsPlayback Zoom Playback Special EffectsFrame-By-Frame Playback C. Recording EN Basic Shooting D.S.C. SnapshotApproximate Number of Storable Images Press SnapshotTo cancel Interval Shooting mode Available only with the remote control.  pgNormal Playback Of Images C. PlaybackRemoving On-Screen Display Auto Playback Of ImagesIndex Playback Of Files Resetting The File Name Protecting Files Tape To a Memory CardTo protect the currently displayed file Menu To Remove Protection Setting Print Information Dpof Setting Deleting Files EN Additional Features for D.S.C To Reset The Number Of PrintsInitialising a Memory Card EXECUTE, and pressMenus with Sub Menus Menus for Detailed Adjustment ENMenus without Sub Menus EN Menus for Detailed Adjustment Recording MenusRemote Wide Mode Demo ModeBeep Tele MacroCAM Reset PriorityLanguage AUX MICPlayback Menus OFF / LCD / LCD/TV Blank SrchAV Input To take a snapshot in the 5-second recording mode LED LightLive Slow Second RecordingSnapshot For Video Recording EN Features for RecordingNight-Scope Exposure Control Iris Lock To return to automatic exposure controlTo return to automatic iris control To lock the exposure control and the irisSpot Exposure Control White Balance AdjustmentBacklight Compensation Wipe Or Fader Effects To deactivate the selected effectSports Variable Shutter Speed 1/250 1/4000Dubbing To Or From a VCR To use this camcorder as a recorderSet S/AV Input to A/V in or S IN*.  pg To use this camcorder as a playerDigital Dubbing EN EditingUsing USB cable B Using DV cable Using USB cableUsing DV cable Audio Dubbing Insert EditingTo hear the dubbed sound during playback To end Insert Editing, press START/STOP, then StopPower Advanced featuresVideo and D.S.C. Recording Video and D.S.C. PlaybackEN Troubleshooting Other problemsTroubleshooting EN DUB Error Insert ErrorCard Error Check CARD’S Write Protection SwitchCleaning The Camcorder User Maintenance ENUnit in Safeguard Mode Remove and Reattach Battery Unit in Safeguard Mode Eject and Reinsert TapeBattery Packs EN CautionsCassettes Memory CardsNot LCD MonitorMain Unit Serious malfunctioning How To Handle a CD-ROMAbout moisture condensation Camcorder AC AdapterØ3.5 mm, stereo ReferencesRecording Capacity Dpof Setting Digital Print Order FormatTerms Software Installation and PC Connection Guide Limited Liability How to handle a CD-ROM For CyberLink DVD Solution System RequirementsSoftware Installation Windows Page Installing USB Mass Storage Class driver Updating Device Manager Windows 98SE onlyConnecting the USB cable To USB connectorTo DV connector Connector To IEEE1394Setting StillClips DpofCopying Files to the PC Windows When using Windows 98SE Still imagesWhen using Windows 2000/Me/XP Click OKViewing the Contents of a Memory Card Macintosh Connections MacintoshVideo Clips Still images Dpof Setting dataNavigation data Playing Back Files on the PC Macintosh Transfer the still images Overview of Enjoying the Moving or Still Images on the PCVia the USB cable
Related manuals
Manual 92 pages 30.15 Kb Manual 88 pages 4.44 Kb Manual 12 pages 31.53 Kb