40 EN | FEATURES FOR RECORDING |
|
|
|
| ||||||
|
|
|
|
|
|
|
|
| |||
|
| Backlight Compensation |
| NOTES: | |||||||
|
|
| |||||||||
|
|
|
|
|
|
|
|
| ● You cannot use the Spot Exposure Control at the | ||
Backlight compensation brightens the subject |
|
| same time with following functions. | ||||||||
quickly. |
|
| • “SQUEEZE” in “WIDE MODE” ( pg. 33) | ||||||||
|
| • “STROBE” in “PROGRAM AE” ( pg. 42) | |||||||||
With simple operation, backlight compensation |
|
| |||||||||
|
| • Digital Zoom ( pg. 19) | |||||||||
feature brightens the dark subject portion by |
|
| |||||||||
|
| • Manual Exposure Control | |||||||||
increasing the exposure. |
|
| |||||||||
| ● Depending on the shooting location and condition, | ||||||||||
1 Set the Power Switch to “M”. |
| ||||||||||
|
| optimum result may not be attained. | |||||||||
2 Press BACK LIGHT so that the Backlight |
|
|
| White Balance Adjustment | |||||||
|
|
| |||||||||
Compensation indicator “ |
| ” appears. |
|
|
| ||||||
To cancel Backlight Compensation |
|
|
|
| |||||||
| The white balance refers to the correctness of | ||||||||||
Press BACK LIGHT twice so that the “ |
| ” |
| ||||||||
|
| colour reproduction under various lighting. If the | |||||||||
indicator disappears. |
| ||||||||||
| white balance is correct, all other colours will be | ||||||||||
|
|
|
|
|
|
|
|
| |||
NOTE: |
| accurately reproduced. | |||||||||
Using Backlight Compensation may cause the light |
| The white balance is usually adjusted | |||||||||
around the subject to become too bright and the |
| automatically. However, more advanced | |||||||||
subject to become white. |
| camcorder operators control this function | |||||||||
|
|
|
|
|
|
|
|
| manually to achieve a more professional colour/ | ||
|
| Spot Exposure Control |
| tint reproduction. | |||||||
|
|
| To change the setting | ||||||||
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
| ||||
Selection of a spot metering area enables more precise exposure compensation. You can select one of the three metering areas on the LCD monitor/viewfinder.
1 Set the Power Switch to “M”.
2 Press BACK LIGHT twice so that the Spot Exposure Control indicator “ 
” appears.
●A spot metering area frame appears at the centre of the LCD monitor/viewfinder.
3 Press + or – to select the desired spot metering area frame.
4 Press MENU.
●Spot Exposure Control is engaged.
●Exposure is adjusted to make the brightness of the selected area most appropriate.
To lock the iris
After step 3, press and hold MENU over 2 seconds. The “
” indication appears and the iris is locked.
To cancel Spot Exposure Control
Press BACK LIGHT once so that the “ 
” indicator disappears.
Set “u” to the desired mode. ( pg. 31)
●The selected mode indicator except “AUTO” appears.
[AUTO]: White balance is adjusted automatically.
MWB: Adjust the white balance manually when shooting under various types of lighting. ( “Manual White Balance Adjustment”)
FINE: Outdoors on a sunny day.
CLOUD: Outdoors on a cloudy day.
HALOGEN: A video light or similar type of lighting is used.
[ ] =
To return to automatic white balance Set “u” to “AUTO”. ( pg. 31)
Or, set the Power Switch to “A”.