JVC GR-DVM5 manual Safety Precautions

Page 3

SAFETY PRECAUTIONS

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTIONS:

If you notice smoke or a peculiar smell coming from the camcorder or AC Adapter, shut it down and unplug it immediately. Continue using the camcorder or AC Adapter under these conditions could lead to fire or electric shock. Contact your JVC dealer. Do not attempt to repair the malfunction yourself.

To prevent shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to qualified personnel.

When you are not using the AC Adapter for a long period of time, it is recommended that you disconnect the power cord from AC outlet.

CAUTION:

To avoid electric shock or damage to the unit, first firmly insert the small end of the power cord into the AC Adapter until it is no longer wobbly, and then plug the larger end of the power cord into an AC outlet.

CAUTIONS:

This camcorder is designed to be used with PAL-type colour television signals. It cannot be used for playback with a television of a different standard. However, live recording and LCD monitor/viewfinder playback are possible anywhere.

This product includes patented and other proprietary technology and will operate only with JVC Data Battery. Use the JVC BN-VF707U/VF714U/VF733U battery packs and, to recharge them or to supply power to the camcorder from an AC outlet, use the provided multi-voltage AC Adapter. (An appropriate conversion adapter may be necessary to accommodate different designs of AC outlets in different countries.)

EN 3

Caution on Replaceable lithium battery

The battery used in this device may present a fire or chemical burn hazard if mistreated.

Do not recharge, disassemble, heat above 100°C or incinerate.

Replace battery with Panasonic (Matsushita Electric), Sanyo, Sony or Maxell CR2025. Danger of explosion or Risk of fire if the battery is incorrectly replaced.

Dispose of used battery promptly.

Keep away from children.

Do not disassemble and do not dispose of in fire.

NOTES:

The rating plate (serial number plate) and safety caution are on the bottom and/or the back of the main unit.

The rating information and safety caution of the AC Adapter are on its upper and lower sides.

When the equipment is installed in a cabinet or on a shelf, make sure that it has sufficient space on all sides to allow for ventilation (10 cm or more on both sides, on top and at the rear).

Do not block the ventilation holes.

(If the ventilation holes are blocked by a newspaper, or cloth etc. the heat may not be able to get out.)

No naked flame sources, such as lighted candles, should be placed on the apparatus.

When discarding batteries, environmental problems must be considered and the local rules or laws governing the disposal of these batteries must be followed strictly.

The apparatus shall not be exposed to dripping or splashing.

Do not use this equipment in a bathroom or places with water.

Also do not place any containers filled with water or liquids (such as cosmetics or medicines, flower vases, potted plants, cups etc.) on top of this unit. (If water or liquid is allowed to enter this equipment, fire or electric shock may be caused.)

Image 3
Contents Dear Customer Digital Still Camera D.S.C. RecordingLED Light Data BatteryWipe/Fader Effects Program AE with Special EffectsSafety Precautions Page References EN Getting Started IndexOther Parts ConnectorsIndicators ControlsDuring D.S.C. Recording Only IntervalBright BR I GHT During Video PlaybackDuring D.S.C. Playback MICBefore Using This Camcorder Provided Accessories How To Attach The Lens CapHow To Attach The Shoulder Strap Core filter Wind once How To Attach The Core FilterClose the core filter until it clicks shut StopperMaximum continuous recording time PowerCharging The Battery Pack Using The Battery PackAbout Batteries Operation ModeData Battery System Using AC PowerGrip Adjustment Language SettingsPower-Linked Operation Viewfinder Adjustment Brightness Adjustment Of The DisplayTripod Mounting To protect valuable files available only for SD Memory Card CardTo protect valuable recordings Close the card coverLCD Monitor And Viewfinder Basic RecordingEN Video Recording Tape Remaining TimeZoom Out Zooming Journalistic ShootingTime Code ZoomVideo Playback To control the speaker volumeNormal Playback Quick ReviewVideo Playback EN Shuttle SearchBlank Search If using a VCR, go to . If not, go to step To AV connector AV cable provided Open the cover. markEN Video Playback Buttons And Functions Installing The BatteryControl Beam Effective Area indoor usePlayback Special Effects Frame-By-Frame PlaybackPlayback Zoom Press Snapshot C. Recording ENBasic Shooting D.S.C. Snapshot Approximate Number of Storable ImagesC. Playback To cancel Interval Shooting modeAvailable only with the remote control.  pg Normal Playback Of ImagesAuto Playback Of Images Index Playback Of FilesRemoving On-Screen Display Menu Resetting The File NameProtecting Files Tape To a Memory Card To protect the currently displayed fileSetting Print Information Dpof Setting Deleting FilesTo Remove Protection EXECUTE, and press EN Additional Features for D.S.CTo Reset The Number Of Prints Initialising a Memory CardMenus for Detailed Adjustment EN Menus without Sub MenusMenus with Sub Menus Recording Menus EN Menus for Detailed AdjustmentTele Macro Remote Wide ModeDemo Mode BeepAUX MIC CAM ResetPriority LanguagePlayback Menus Blank Srch AV InputOFF / LCD / LCD/TV Second Recording To take a snapshot in the 5-second recording modeLED Light Live SlowEN Features for Recording Night-ScopeSnapshot For Video Recording To lock the exposure control and the iris Exposure Control Iris LockTo return to automatic exposure control To return to automatic iris controlWhite Balance Adjustment Backlight CompensationSpot Exposure Control To deactivate the selected effect Wipe Or Fader EffectsVariable Shutter Speed 1/250 1/4000 SportsTo use this camcorder as a player Dubbing To Or From a VCRTo use this camcorder as a recorder Set S/AV Input to A/V in or S IN*.  pgEN Editing Digital DubbingUsing USB cable Using DV cableUsing USB cable B Using DV cable To end Insert Editing, press START/STOP, then Stop Audio DubbingInsert Editing To hear the dubbed sound during playbackVideo and D.S.C. Playback PowerAdvanced features Video and D.S.C. RecordingOther problems EN TroubleshootingTroubleshooting EN Check CARD’S Write Protection Switch DUB ErrorInsert Error Card ErrorUnit in Safeguard Mode Eject and Reinsert Tape Cleaning The CamcorderUser Maintenance EN Unit in Safeguard Mode Remove and Reattach BatteryMemory Cards Battery PacksEN Cautions CassettesLCD Monitor Main UnitNot How To Handle a CD-ROM About moisture condensationSerious malfunctioning References CamcorderAC Adapter Ø3.5 mm, stereoDpof Setting Digital Print Order Format TermsRecording Capacity Software Installation and PC Connection Guide Limited Liability How to handle a CD-ROM System Requirements For CyberLink DVD SolutionSoftware Installation Windows Page Updating Device Manager Windows 98SE only Installing USB Mass Storage Class driverTo IEEE1394 Connecting the USB cableTo USB connector To DV connector ConnectorDpof SettingStill ClipsCopying Files to the PC Windows Still images When using Windows 98SEClick OK When using Windows 2000/Me/XPConnections Macintosh Viewing the Contents of a Memory Card MacintoshStill images Dpof Setting data Navigation dataVideo Clips Playing Back Files on the PC Macintosh Overview of Enjoying the Moving or Still Images on the PC Via the USB cableTransfer the still images
Related manuals
Manual 92 pages 30.15 Kb Manual 88 pages 4.44 Kb Manual 12 pages 31.53 Kb