JVC GR-DF450 instruction manual Operation Mode, Using AC Power, About Batteries

		GETTING STARTED	EN 15
Using AC Power
		M (Manual Recording):
		Allows you to set various recording functions
Perform step 4 in “Charging The Battery Pack”.
		using the Menus. ( pg. 36)
NOTE:
		If you want more creative capabilities than Full
The provided AC Adapter features automatic		Auto Recording, try this mode.
voltage selection in the AC range from 110 V to
		OFF:
240 V.
		Allows you to switch off the camcorder.
About Batteries
		PLAY:
DANGER! Do not attempt to take the batteries		● Allows you to play back a recording on the
apart, or expose them to flame or excessive		tape.
heat, as it may cause a fire or explosion.		● Allows you to display a still image stored in
WARNING! Do not allow the battery or its		the memory card or to transfer a still image
terminals to come in contact with metals, as this		stored in the memory card to a PC.
can result in a short circuit and possibly start a		(GR-DF470/450 only)
fire.		● Allows you to set various playback functions
To resume the original function of the		using the Menus. ( pg. 36)
accurate battery power indication
If the battery power indication differs from the		VIDEO/MEMORY Switch Position
actual operating time, fully charge the battery, and		(GR-DF470/450 only)
then run it down. However this function may not
		VIDEO:
turn back if the battery was used for a long period
		Allows you to record on a tape or play back a
of time under extremely high/low temperature
		tape. If “REC SELECT” is set to “	/	”
condition or charged too many times.
		( pg. 40), still images are recorded both on
	Operation Mode	the tape and the memory card.
		MEMORY:
To turn on the camcorder, set the Power Switch
		● Allows you to record in a memory card or
to any operation mode except “OFF” while		access data stored in a memory card.
pressing down the Lock Button located on the		● When the Power Switch is set to “A” or “M”,
switch.		the currently selected image size appears.

Power Switch Power-Linked Operation

GETTING STARTED

Lock Button

POWER/

CHARGE lamp

VIDEO/MEMORY*

Choose the appropriate operation mode according to your preference using the Power Switch and VIDEO/MEMORY Switch.*

* GR-DF470/450 only

Power Switch Position

A (Full Auto Recording):

Allows you to record using NO special effects or manual adjustments. Suitable for standard recording.

The “A” indicator appears on the display.

When the Power Switch is set to “A” or “M”, you can also turn on/off the camcorder by opening/ closing the LCD monitor or pulling out/pushing in the viewfinder.

INFORMATION:

The following explanations in this manual supposes the use of LCD monitor in your operation. If you want to use the viewfinder, close the LCD monitor and pull out the viewfinder fully.