JVC GR-DF450 instruction manual Wipe Or Fader Effects, To deactivate the selected effect

							FEATURES FOR RECORDING	EN 47
		Wipe Or Fader Effects					WIPE–SLIDE: Wipe in from right to left, or
				wipe out from left to right.
							WIPE–DOOR: Wipe in as the two halves of
These effects let you make pro-style scene
transitions. Use them to spice up the transition				a black screen open to the left and right,
from one scene to the next.				revealing the scene, or wipe out and the black
Wipe or Fader works when video recording is				screen reappears from left and right to cover the
				scene.
started or stopped.
							WIPE–SCROLL: The scene wipes in from
1 Set the VIDEO/MEMORY Switch to “VIDEO”.
				the bottom to the top of a black screen, or wipes
(GR-DF470/450 only)				out from top to bottom, leaving a black screen.
2 Set the Power Switch to “M”.							WIPE–SHUTTER: Wipe in from the center
3 Set “v” to the desired mode. ( pg. 36)				of a black screen toward the top and bottom, or
● The WIPE/FADER menu disappears and the				wipe out from the top and bottom toward the
	effect is reserved.			center leaving a black screen.
● The selected effect indicator appears.
4 Press the Recording Start/Stop Button to						Program AE With Special Effects
activate the Fade-in/out or Wipe-in/out.
				1 Set the Power Switch to “M”.
To deactivate the selected effect
Select “OFF” in step 3. The effect indicator							r
disappears.				2 Set “ ” to the desired mode. ( pg. 36)
				● The PROGRAM AE menu disappears and the
NOTES:					selected effect is activated.
				● The selected effect indicator appears.
● You can extend the length of a Wipe or Fader by
				To deactivate the selected effect
	pressing and holding the Recording Start/Stop
	Button.			Select “OFF” in step 2. The effect indicator
● Some Wipe/Fader Effects cannot be used with				disappears.
	certain modes of Program AE with special effects.			NOTES:
	(See the right column.) In this case, the selected
				● Some modes of Program AE with special effects
	indicator blinks or goes out.
					cannot be used during Night-Alive.
			WIPE/FADER
				● When a subject is too bright or reflective, a vertical
					streak may appear (smear phenomenon). Smear
OFF: Disables the function. (Factory-preset)					phenomenon tends to occur when “SPORTS” or
			FADER–WHITE: Fade in or out with a white		any mode of “SHUTTER 1/250 – 1/4000” is
					selected.
screen.
				● Some modes of Program AE with special effects
			FADER–BLACK: Fade in or out with a black		cannot be used with certain Wipe/Fader effects.
screen.					(See the left column.) In this case, the selected
			FADER–B.W: Fade in to a color screen		indicator blinks or goes out.
from a black and white screen, or fade out from
color to black and white.
			WIPE–CORNER: Wipe in on a black screen
from the upper right to the lower left corner, or
wipe out from lower left to upper right, leaving a
black screen.
			WIPE–WINDOW: The scene starts in the
center of a black screen and wipes in toward the
corners, or comes in from the corners, gradually
wiping out to the center.

ADVANCED FEATURES

CONTINUED ON NEXT PAGE