Normal Playback Of Images, Auto Playback Of Images

D.S.C. PLAYBACK (GR-DF470/450 only) EN 29

Normal Playback Of Images

Images shot with the camcorder are automatically numbered, then stored in numerical order in the memory card. You can view the stored images, one at a time, much like flipping through a photo album.

MENU SEL

Power Switch

		>	Lock Button
VIDEO/	<	>	SET
MEMORY

1 Load a memory card. ( pg. 18)

2 Set the VIDEO/MEMORY Switch to “MEMORY”.

3 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.

●The type of file (IMAGE or E-MAIL CLIP) which has been played back at the last time is displayed.

4 If the video clip playback (E-MAIL CLIP, see the right column) screen appears, press SEL. The MEMORY SELECT screen appears.

5 Pressorto select “IMAGE”, and press SET. The image playback screen (IMAGE) appears.

6 Press < to display the previous file. Press > to display the next file.

NOTE:

Images shot and stored on the card with another device with resolutions other than “640 x 480” and “1024 x 768” will be displayed as thumbnails only. These thumbnail images cannot be transferred to a PC.

Playback Zoom

Available only with the remote control. ( pg. 25)

Auto Playback Of Images

You can run through all the images stored in memory card automatically.

1 Perform steps 1 – 3 in “Normal Playback Of Images”.

2 Press 4/9 to start Auto Playback.

●If you press < during Auto Playback, files are displayed in descending order.

●If you press > during Auto Playback, files are displayed in ascending order.

3 To end Auto Playback, press 8.

Playback Of Video Clips

You can view video clips ( pg. 31) stored in the memory card.

1 Perform steps 1 – 3 in “Normal Playback Of Images”.

2 If the image playback (IMAGE) screen appears, press SEL. The MEMORY SELECT screen appears.

3 Press or to select	E - MAIL CLIP
“E-MAIL CLIP”, and press
SET. The video clip
playback screen (E-MAIL
CLIP) appears.

4 Press < to select the previous file. Press > to select the next file.

5 To start playback, press 4/9.

6 To stop playback, press 8.

NOTES:

●The video clip files stored with this camcorder are compatible with MPEG4. Some MPEG4 files stored with other devices cannot be played back with this camcorder.

●You can also view video clips on your PC by using Windows® Media Player version 6.4 or later. Refer to the instructions of PC and software.

DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK (GR-DF470/450 only)