52 EN EDITING
|
| Dubbing To Or From A Video Unit | To use this camcorder as a player |
|
| 1 Make sure all units are turned off. | |
|
| Equipped With A DV Connector | |
|
| 2 Connect this camcorder to a video unit | |
|
| (Digital Dubbing) | |
|
| equipped with a DV input connector using a DV | |
|
|
| cable as shown in the illustration. |
|
|
| |
It is also possible to copy recorded scenes from | 3 Start playback on the camcorder. ( pg. 22) | ||
the camcorder onto another video unit equipped | 4 At the point you want to start dubbing, start | ||
with a DV connector. Since a digital signal is | |||
sent, there is little if any image or sound | recording on the video unit. (Refer to the video | ||
deterioration. | unit’s instruction manual.) | ||
|
|
| 5 To stop dubbing, stop recording on the video |
|
|
| unit, then stop playback on this camcorder. |
NOTES:
To DV IN/OUT
Core filter
DV cable (optional)
To DV IN/OUT
●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 15)
●If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed.
●Even though the DV cable is connected correctly, sometimes the image may not appear in step 4. If this occurs, turn off the power and make connections again.
●If “Playback Zoom” ( pg. 26) or “Playback Special Effects” ( pg. 26) is attempted or SNAPSHOT is pressed during playback, only the original playback image recorded on the tape is output from the DV IN/OUT connector.
●When using a DV cable, be sure to use the optional JVC
To use this camcorder as a recorder
1 Make sure all units are turned off.
2 Connect this camcorder to a video unit equipped with a DV output connector using a DV cable as shown in the illustration.
3 Set the camcorder’s Power Switch to “PLAY”.
Video unit equipped with DV connector
4
5 Press the Recording Start/Stop Button to engage the
●The “ DV IN ” indication appears on the screen.
6 Start playback on the player.
7 At the point you want to start dubbing, press the Recording Start/Stop Button to start
dubbing. The indication rotates.
8 Press the Recording Start/Stop Button again
to stop dubbing. The indication stops rotating.
9 Press 8 to return to the normal playback mode.