JVC GR-DF450 instruction manual Still, Clips, Data, Setting

		When using Windows® 98SE/Me/
	Viewing the Contents of a
		2000:
	®	1 Double-click the [My Computer] icon
	Memory Card (Windows )	on the desktop. The [Removable
1	Install [USB Mass Storage Class	Disk] icon which represents the
	driver]. (Windows® 98SE only)	memory card in the camcorder
	( pg. 5)	appears in the [My Computer]
		window.
2 Make sure that there is a
	memory card in the camcorder.
3 Set the camcorder’s VIDEO/
	MEMORY Switch to “MEMORY”.
4 Set the camcorder’s Power
	Switch to “PLAY” while	2 Double-click the [Removable Disk]
	pressing down the Lock Button
		icon.
	located on the switch.
		● Windows® 98SE: [Removable Disk]
	The camcorder turns on.	icon does not appear if USB Mass
5 Connect the camcorder to the
		Storage Class driver is not installed
	PC with a USB cable. ( pg. 8)	properly. In this case, refer to
	On the camcorder’s LCD monitor	“Updating [Device Manager]
	[USB] appears.	(Windows® 98SE only)” ( pg. 7).
6 When using Windows® XP:		7 The folders in the memory card
	The [Removable
		appear.
	Disk] window
	appears on the
	PC’s screen
	after a moment.
	Select [Open
	folders to view
	files using
	Windows
	Explorer] and
	click [OK].	Still	images		Video	clips
	NOTE:
				Navigation
	If the [Removable Disk] window does						DPOF
				data
	not appear, confirm the connection						setting
	( pg. 8) or perform the steps 1 and							data
	2 in the right.	Different file types are stored in
		different folders.

[DCIM]: Contains folders with still images (extension “.jpg”)

[DCVI]: Contains folders with video clips (extension “.asf”)

● The [DCVI] folder is displayed only when the camcorder is equipped with E-Mail Clip Recording function.

[MISC]: Contains folders with DPOF setting data

— 9 —

CONTINUED ON NEXT PAGE