JVC GR-D390EK Power, Charging The Battery Pack, Slide the battery pack upward while pressing

14 EN GETTING STARTED

	Power	To detach the battery pack
		Slide the battery pack upward while pressing
This camcorder’s 2-way power supply system		PUSH BATT. to detach it.
lets you choose the most appropriate source of		Battery pack	Charging time
power. Do not use provided power supply units
		BN-VF707U*	Approx. 1 hr. 30 min.
with other equipment.
Charging The Battery Pack		BN-VF714U	Approx. 2 hrs. 40 min.
		BN-VF733U	Approx. 5 hrs. 40 min.

Battery pack mount * Provided

Battery pack

Arrow
To DC	To AC outlet
connector

PUSH

BATT.

POWER/ CHARGE lamp

Power switch

NOTES:

● This product includes patented and other

proprietary technology and will operate only

with JVC Data Battery. Use the JVC BN-

VF707U/VF714U/VF733U battery packs. Using

generic non-JVC batteries can cause damage

to the internal charging circuitry.

● If the protective cap is attached to the battery

pack, remove it first.

● During charging, the camcorder cannot be

operated.

● Charging is not possible if the wrong type of

battery is used.

● When charging the battery pack for the first time

or after a long storage period, the POWER/

CHARGE lamp may not light. In this case, remove

the battery pack from the camcorder, then try

charging again.

● If the battery operation time remains extremely

short even after having been fully charged, the

battery is worn out and needs to be replaced.

Please purchase a new one.

AC Adapter (ex. AP-V17E)

1 Set the Power Switch to “OFF”.

2 With the arrow on the battery pack pointing downward, push the battery pack slightly against the battery pack mount a.

3 Slide down the battery pack until it locks in place b.

4 Connect the AC Adapter to the camcorder.

5 Connect the Power Cord to the AC Adapter. (AP-V14E only)

6 Plug the AC Adapter into an AC outlet. The POWER/CHARGE lamp on the camcorder blinks to indicate charging has started.

7 When the POWER/CHARGE lamp goes out, charging is finished. Unplug the AC Adapter from the AC outlet. Disconnect the AC Adapter from the camcorder.

● Since the AC Adapter processes electricity

internally, it becomes warm during use. Be sure to

use it only in well-ventilated areas.

● Using the optional AA-VF7 Battery Charger, you

can charge the BN-VF707U/VF714U/VF733U

battery pack without the camcorder.

● After 5 minutes has elapsed in Record-Standby

mode with the cassette inserted, and no operation

is performed, ("PAUSE" indicator may not appear),

the camcorder will automatically turn off its power

supplied from the AC Adapter. In this case, the

battery charge starts if the battery is attached to

the camcorder.