JVC GR-D390EK manual Displays the battery remaining power, Remaining power level High Exhausted

Page 48

48 EN TROUBLESHOOTING

		Warning Indications
The memory card cannot be removed from		Warning Indications
the camcorder.

HPush in the memory card a few more times. ( pg. 19)

Displays the battery remaining power.

Picture does not appear on the LCD monitor.

●The viewfinder is pulled out and “PRIORITY” is

set to “FINDER”.

HPush the viewfinder back in or set “PRIORITY” to “LCD”. ( pg. 20, 32, 34)

●The LCD monitor’s brightness setting is too dark. HAdjust the brightness of the LCD monitor.

( pg. 17)

HIf the monitor is tilted upward 180 degrees, open the monitor fully. ( pg. 20)

An error indication (01 – 04 or 06) appears.

●A malfunction of some kind has occurred. In this case the camcorder’s functions become unusable. ( pg. 50)

The remote control does not work.

●“REMOTE” is set to “OFF”.

HSet “REMOTE” to “ON”. ( pg. 32, 34)

●The remote control does not point at the remote

sensor.

HPoint at the remote sensor. ( pg. 25)

●The remote control batteries are exhausted.

HReplace the batteries with fresh ones. ( pg. 25)

Remaining power level

High

Exhausted

As the battery power comes close to nil, the battery remaining power indicator blinks. When the battery power is exhausted, power turns off automatically.

●Appears if a tape is loaded. ( pg. 18)

●Blinks when no tape is loaded.( pg. 18)

CHECK TAPE’S ERASE PROTECTION TAB

Appears when the erase protection tab is set to “SAVE” while the Power Switch is set to “REC” and the VIDEO/MEMORY Switch is set to “VIDEO”. ( pg. 16)

USE CLEANING CASSETTE

Appears if dirt is detected on the heads during recording. Use an optional cleaning cassette. ( pg. 53)

CONDENSATION, OPERATION

PAUSED PLEASE WAIT

Appears if condensation occurs. When this indication is displayed, wait more than 1 hour until condensation disappears.

TAPE!

Appears if a tape is not loaded when the Recording Start/Stop Button or SNAPSHOT Button is pressed while the Power Switch is set to “REC” and the VIDEO/MEMORY Switch is set to “VIDEO”.

TAPE END

Appears when the tape ends during recording or playback.

SET DATE/TIME!

●Appears when the date/time is not set. ( pg. 16)

●The built-in clock battery has run out and the previously set date/time has been erased. Consult your nearest JVC dealer for replacement.

Image 48

Contents For Accessories Digital Still Camera D.S.C. RecordingDear Customer We recommend cleaning your video heads before use Use SP Standard mode for important video recordingsFor safety and reliability Do not leave the unitData Battery Wipe/Fader EffectsBacklight Compensation LED LightImportant for owners in the U.K Blue to N Neutral or Black Brown to L Live or RedInformation for Users on Disposal of Old Equipment European UnionSome DO’S and DON’TS on the Safe USE of Equipment References Index Connectors IndicatorsPOWER/CHARGE Lamp pg ControlsLCD Monitor/Viewfinder Indications During Video RecordingSound 12BI T DECDuring 169 Recording During D.S.C. Playback During Video Playback100-0013 25xBefore Using This Camcorder Provided AccessoriesHow To Attach The Core Filter How To Attach The Lens CapHow To Attach The Shoulder Strap Power Charging The Battery PackSlide the battery pack upward while pressing With other equipmentOperation Mode Using The Battery PackData Battery System Using AC PowerLanguage Settings Date/Time SettingsAuto/Manual Mode Power-Linked OperationGrip Adjustment Viewfinder AdjustmentBrightness Adjustment Of The Display Tripod MountingLoading/Unloading a Cassette Or eject a cassetteTo protect valuable recordings Make sure the camcorder’s power is off Open the card cover Loading/Unloading a Memory CardClose the card cover To protect valuable files available only for SD Memory CardWhile using the LCD monitor While using the viewfinderTape Remaining Time LCD Monitor And ViewfinderZooming Journalistic Shooting Interface ShootingZoom Zoom OutQuick Review Display Minutes Seconds Frames Frames = 1 secondTo control the speaker volume Normal PlaybackShuttle Search Still PlaybackIf using a VCR, go to . If not, go to step To S connector To AV ConnectorCable Optional Provided Installing The Battery ControlBeam Effective Area indoor use Buttons And FunctionsSlow-Motion Playback Playback Special EffectsPlayback Zoom Frame-By-Frame PlaybackLock Button Power Switch Basic Shooting D.S.C. SnapshotApproximate Number of Storable Images Stored in the memory cardNormal Playback Of Images Auto Playback Of ImagesIndex Playback Of Files Resetting The File Name Protecting FilesTo protect the currently displayed file To protect all files stored in the memory cardDpof Setting Deleting FilesTo Reset The Number Of Prints Initialising a Memory CardNumber Of Prints To Print By Selecting Still ImagesVideo Playback Menu Recording Menus pg , Brightness Adjustment Of The Display pg , Date/Time SettingsLanguage setting can be changed. pg Is displayedSound Mode and Narration When set to OFF, the camcorder’s display disappearsPlayback Menus Fine / StandardWide Mode LED LightLive Slow Press Snapshot Slow during recording or playbackNight-Scope TapeSnapshot Record Still Image On Manual FocusExposure Control To return to automatic exposure controlTo return to automatic iris control To lock the exposure control and the irisWhite Balance Adjustment Backlight CompensationSpot Exposure Control Manual White Balance Adjustment Wipe Or Fader EffectsProgram AE, Effects and Shutter Features for Recording EN SportsDubbing To a VCR Digital Dubbing Dubbing To Or From a Video UnitTo use this camcorder as a recorder To use this camcorder as a playerUsing USB cable Using DV cableUsing USB cable B Using DV cable Connection To a Personal Computer Audio Dubbing Insert Editing To hear the dubbed sound during playback To end Insert Editing, press START/STOP, then StopPower Advanced featuresVideo and D.S.C. Playback Video and D.S.C. RecordingOther problems Troubleshooting ENDisplays the battery remaining power Appears when the tape ends during recording or playbackRemaining power level High Exhausted DUB Error Unit in Safeguard Mode Eject and Reinsert Tape Cleaning The Camcorder To clean the exteriorTo clean the LCD monitor To clean the lensBattery Packs CassettesMemory Cards LCD Monitor Main UnitNot How To Handle a CD-ROM About moisture condensationSerious malfunctioning Camcorder AC AdapterReferences Dpof Setting Memory Card TapeSoftware Installation and USB Connection Guide Contents JVC Software License Agreement Limited LiabilityTerm How to handle a CD-ROM System Requirements Software Installation Windows Connecting the USB cable To USB connectorDpof setting data Still imagesCopying Files to the PC Windows Still ImagesDisconnecting the USB cable Windows Connections Macintosh USB cableFrom a memory card can cause problems When it is necessary to delete a file fromPlaying Back Files on the PC Macintosh Disconnecting the USB cable Macintosh Software Installation and USB Connection Guide