ADDITIONAL FEATURES FOR D.S.C. EN 29
Resetting The File Name
By resetting the file name, a new folder will be made. The new files you are going to make will be stored in the new folder. It is convenient to separate the new files from previously made files.
1 Perform steps 1 – 3 in “Normal Playback Of Images” ( pg. 28).
2 Press MENU. The Menu Screen appears.
3 Press 
, 
, 
or 
to select “NO. RESET”, and press SET. The NO. RESET screen appears.
4 Press 
or 
to select “EXECUTE”, and press SET. The new folder (such as “101JVCGR”) will be made and the file name of the next shot starts from DVC00001.
NOTE:
If the file name reaches DVC09999, a new folder (such as “101JVCGR”) will be made and the file name will start again from DVC00001.
Protecting Files
The Protect mode helps prevent the accidental erasure of files.
1 Perform steps 1 – 3 in “Normal Playback Of Images” ( pg. 28).
2 Press MENU. The Menu Screen appears.
3 Press 
, 
, 
or 
to select “PROTECT”, and press SET. The PROTECT Menu appears.
To protect the currently displayed file
4 Press 
or 
to select “CURRENT”, and press SET or 
. The PROTECT screen appears.
5 Press 
or 
to select the desired file.
6 Press 
or 
to select “EXECUTE”, and press SET.
● To cancel protection, select “RETURN”.
● Repeat steps 5 and 6 for all files you want to protect.
To protect all files stored in the memory card
4 Press 
or 
to select “PROT.ALL”, and press SET or 
. The PROTECT screen appears.
5 Press 
or 
to select “EXECUTE”, and press SET.
●To cancel protection, select “RETURN”.
NOTES:
●If the “
” mark appears, the currently displayed file is protected.
●When the memory card is initialised or corrupted, even protected files are deleted. If you do not want to lose important files, transfer them to a PC and save them.
DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK