JVC GR-D390EK manual Wipe Or Fader Effects, Manual White Balance Adjustment

40 EN FEATURES FOR RECORDING

Manual White Balance Adjustment		● The WIPE/FADER menu disappears and the
		effect is reserved.
Adjust the white balance		● The selected effect indicator appears.
		5 Press the Recording Start/Stop Button to
manually when shooting
		activate the Fade-in/out or Wipe-in/out.
under various types of
lighting.		To deactivate the selected effect
1 Set the Power Switch		Select “OFF” in step 4. The effect indicator
		disappears.
to “REC”.	White paper	NOTE:
2 Set the recording
mode to “M”. ( pg. 16)		You can extend the length of a Wipe or Fader by
		pressing and holding the Recording Start/Stop
3 Hold a sheet of plain white paper in front of
		Button.
the subject. Adjust zoom or position yourself so		WIPE/FADER
that the white paper fills the screen.
4 Select FUNCTION Menu. ( pg. 33)		OFF: Disables the function. (Factory-preset)
5 Select “MWB” in “W.BALANCE” menu.		WHITE	: Fade in or out with a white screen.
( pg. 33), then press and hold SET or until		BLACK	: Fade in or out with a black screen.
begins blinking.
		SLIDE
● When the setting is completed,	stops		: Wipe in from right to left, or wipe out
blinking.		from left to right.
6 Press SET or to engage the setting.		SCROLL	: The scene wipes in from the
7 Press MENU. The Menu Screen closes and		bottom to the top of a black screen, or wipes out
the Manual White Balance indicator	is	from top to bottom, leaving a black screen.
displayed.		Program AE, Effects and Shutter
NOTES:
● In step 3, it may be difficult to focus on the white		Effects
paper. In such a case, adjust focus manually.		1 Set the Power Switch to “REC”.
( pg. 37)
● A subject can be shot under various types of
		2 Set the recording mode to “M”. ( pg. 16)
lighting conditions indoors (natural, fluorescent,
candlelight, etc.). Because the colour temperature		3 Set “EFFECT”, “PROGRAM AE” or
is different depending on the light source, the		“SHUTTER” in FUNCTION Menu. ( pg. 33)
subject tint will differ depending on the white
		● The EFFECT, PROGRAM AE or SHUTTER menu
balance settings. Use this function for a more
		disappears and the selected effect is activated.
natural result.
		● The selected effect indicator appears.
● Once you adjust white balance manually, the
		To deactivate the selected effect
setting is retained even if the power is turned off or
the battery removed.		Select “OFF” in step 3. The effect indicator
Wipe Or Fader Effects		disappears.
		NOTES:
These effects let you make pro-style scene		● Program AE, Effects and Shutter Effects can be
		changed during Record-Standby.
transitions. Use them to spice up the transition		● Some modes of Program AE and Shutter Effects
from one scene to the next.		cannot be used during Night-Scope.
Wipe or Fader works when video recording is		● When a subject is too bright or reflective, a vertical
started or stopped.		streak may appear (smear phenomenon). Smear
1 Set the VIDEO/MEMORY Switch to “VIDEO”.		phenomenon tends to occur when “SPORTS” or
		mode of “SHUTTER 1/500 and 1/4000” is

2 Set the Power Switch to “REC”.	selected.
3 Set the recording mode to “M” ( pg. 16).
4 Set “WIPE/FADER” in FUNCTION Menu.
( pg. 33)