JVC GR-D390EK manual DUB Error

Page 49

TROUBLESHOOTING EN 49

LENS CAP

Appears for 5 seconds after power is turned on if the lens cap is attached or when it is dark.

A. DUB ERROR!

Appears if Audio Dubbing is attempted on a blank portion of a tape. ( pg. 45)

A. DUB ERROR!

<CANNOT DUB ON A LP RECORDED TAPE>

<CANNOT DUB ON A 16BIT RECORDING> <CHECK TAPE’S ERASE PROTECTION TAB>

Appears if Audio Dubbing is attempted on a tape recorded in the LP mode. ( pg. 45)

Appears if Audio Dubbing is attempted on a tape recorded in 16-BIT audio. ( pg. 45)

Appears if A. DUB (D) on the remote control is pressed when the erase protection tab is set to “SAVE”. ( pg. 45)

INSERT ERROR!

<CANNOT EDIT ON A LP RECORDED TAPE>

<CHECK TAPE’S ERASE PROTECTION TAB>

<CANNOT EDIT ON A BLANK PORTION>

Appears if Insert Editing is attempted on a tape recorded in the LP mode. ( pg. 45)

Appears if INSERT (I) on the remote control is pressed when the erase protection tab is set to “SAVE”. ( pg. 45)

Appears if Insert Editing is attempted on a blank portion of a tape. ( pg. 45)

MEMORY IS FULL

Appears when the memory card’s memory is full and shooting is not possible.

HDV

Appears when pictures recorded in the HDV format are detected. The pictures in the HDV format cannot be played back with this camcorder.

?

Appears when playing back a file that is not compatible with DCF or a file with a size that is not compatible with this camcorder.

COPY PROTECTED

Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recorder.

MEMORY CARD!

Appears if there is no memory card loaded when the SNAPSHOT Button is pressed while the Power Switch is set to “REC” and the VIDEO/ MEMORY Switch is set to “MEMORY”

PLEASE FORMAT

Appears when there is a problem with a memory card and its memory is corrupt, or it has not been initialised. Initialise the memory card.

( pg. 31)

NO IMAGES STORED

Appears if there are no image files stored in the memory card when you attempt memory card playback.

CARD ERROR!

Appears when the camcorder does not recognise the loaded memory card. Remove the memory card once and insert it again. Repeat these procedures until no indication appears. If the indication still appears, the memory card is corrupted.

CHECK CARD’S WRITE PROTECTION SWITCH

Appears when you attempt to shoot digital still images when the write protection tab on the SD Memory Card is set to the “LOCK” position.

REFERENCES

Image 49
Contents Digital Still Camera D.S.C. Recording For AccessoriesDear Customer Use SP Standard mode for important video recordings We recommend cleaning your video heads before useFor safety and reliability Do not leave the unitWipe/Fader Effects Data BatteryBacklight Compensation LED LightBlue to N Neutral or Black Brown to L Live or Red Important for owners in the U.KEuropean Union Information for Users on Disposal of Old EquipmentSome DO’S and DON’TS on the Safe USE of Equipment References Index Indicators ConnectorsPOWER/CHARGE Lamp  pg ControlsDuring Video Recording LCD Monitor/Viewfinder IndicationsSound 12BI T DECDuring Video Playback During 169 Recording During D.S.C. Playback100-0013 25xProvided Accessories Before Using This CamcorderHow To Attach The Lens Cap How To Attach The Core FilterHow To Attach The Shoulder Strap Charging The Battery Pack PowerSlide the battery pack upward while pressing With other equipmentUsing The Battery Pack Operation ModeData Battery System Using AC PowerDate/Time Settings Language SettingsAuto/Manual Mode Power-Linked OperationViewfinder Adjustment Grip AdjustmentBrightness Adjustment Of The Display Tripod MountingOr eject a cassette Loading/Unloading a CassetteTo protect valuable recordings Loading/Unloading a Memory Card Make sure the camcorder’s power is off Open the card coverClose the card cover To protect valuable files available only for SD Memory CardWhile using the viewfinder While using the LCD monitorTape Remaining Time LCD Monitor And ViewfinderInterface Shooting Zooming Journalistic ShootingZoom Zoom OutDisplay Minutes Seconds Frames Frames = 1 second Quick ReviewNormal Playback To control the speaker volumeShuttle Search Still PlaybackTo S connector To AV Connector If using a VCR, go to . If not, go to stepCable Optional Provided Control Installing The BatteryBeam Effective Area indoor use Buttons And FunctionsPlayback Special Effects Slow-Motion PlaybackPlayback Zoom Frame-By-Frame PlaybackBasic Shooting D.S.C. Snapshot Lock Button Power SwitchApproximate Number of Storable Images Stored in the memory cardAuto Playback Of Images Normal Playback Of ImagesIndex Playback Of Files Protecting Files Resetting The File NameTo protect the currently displayed file To protect all files stored in the memory cardDeleting Files Dpof SettingInitialising a Memory Card To Reset The Number Of PrintsNumber Of Prints To Print By Selecting Still ImagesVideo Playback Menu Recording Menus  pg , Date/Time Settings  pg , Brightness Adjustment Of The DisplayLanguage setting can be changed.  pg Is displayedWhen set to OFF, the camcorder’s display disappears Sound Mode and NarrationPlayback Menus Fine / StandardLED Light Wide ModeLive Slow Press Snapshot Slow during recording or playbackTape Night-ScopeSnapshot Record Still Image On Manual FocusTo return to automatic exposure control Exposure ControlTo return to automatic iris control To lock the exposure control and the irisBacklight Compensation White Balance AdjustmentSpot Exposure Control Wipe Or Fader Effects Manual White Balance AdjustmentProgram AE, Effects and Shutter Sports Features for Recording ENDubbing To a VCR Dubbing To Or From a Video Unit Digital DubbingTo use this camcorder as a recorder To use this camcorder as a playerUsing DV cable Using USB cableUsing USB cable B Using DV cable Connection To a Personal ComputerInsert Editing Audio DubbingTo hear the dubbed sound during playback To end Insert Editing, press START/STOP, then StopAdvanced features PowerVideo and D.S.C. Playback Video and D.S.C. RecordingTroubleshooting EN Other problemsAppears when the tape ends during recording or playback Displays the battery remaining powerRemaining power level High Exhausted DUB Error Unit in Safeguard Mode Eject and Reinsert Tape To clean the exterior Cleaning The CamcorderTo clean the LCD monitor To clean the lensCassettes Battery PacksMemory Cards Main Unit LCD MonitorNot About moisture condensation How To Handle a CD-ROMSerious malfunctioning AC Adapter CamcorderReferences Memory Card Tape Dpof SettingSoftware Installation and USB Connection Guide Contents Limited Liability JVC Software License AgreementTerm How to handle a CD-ROM System Requirements Software Installation Windows To USB connector Connecting the USB cableStill images Dpof setting dataStill Images Copying Files to the PC WindowsDisconnecting the USB cable Windows USB cable Connections MacintoshWhen it is necessary to delete a file from From a memory card can cause problemsPlaying Back Files on the PC Macintosh Disconnecting the USB cable Macintosh Software Installation and USB Connection Guide