JVC GR-D390EK manual Initialising a Memory Card, To Reset The Number Of Prints

			ADDITIONAL FEATURES FOR D.S.C.				EN 31
3 Press
	, ,	or to		To Reset The Number Of Prints
select “DPOF”, and press
				1 Perform steps 1 – 3 in “To Print All Still
SET. The DPOF Menu
appears.
				Images (One Print For Each)”. ( pg. 30)
4 Press
	or	to select		2 Press	or	to select “RESET”, and press
“ALL 1”, and press SET or
				SET or	. The DPOF screen appears.
. The DPOF screen
				3 Press	or	to select “EXECUTE”, and
appears.
5 Press	or	to select		press SET. The normal playback screen
				appears.

“EXECUTE”, and press	● To cancel selection, select “RETURN”.
SET. The normal playback
	● The number of prints is reset to 0 for all still
screen appears.
	images.

●To cancel selection, select

“RETURN”.	CAUTION:
	While performing the above, never disconnect
To Print By Selecting Still Images And	power, as this may cause the memory card to be
	corrupted.
Number Of Prints

1 Perform steps 1 – 3 in “To Print All Still

F Initialising A Memory Card

Images (One Print For Each)”. ( pg. 30)			You can initialise a memory card any time.
2 Press	or	to select	After initialising, all files and data stored in the
“CURRENT”, and press			memory card, including those which have been
			protected, are cleared.
SET or	. The DPOF
			1 Set the VIDEO/MEMORY Switch to
screen appears.
3 Press	or	to select	“MEMORY”.
the desired file.			2 Set the Power Switch to “PLAY” while
4 Press	or	to select the number indication	pressing down the Lock Button located on the
(00), and press SET.			switch.
5 Select the number of			3 Press MENU. The Menu Screen appears.
prints by pressing to			4 Press ,	,	or
increase the number, or
			to select “FORMAT”, and
to decrease the number,
			press SET. The FORMAT
and press SET.
			screen appears.
● Repeat steps 3 through 5
			5 Press	or	to
for the desired number of
prints.			select “EXECUTE”, and
● The number of prints can be set up to 15.			press SET. The memory
● To correct the number of prints, select the image			card is initialised.
again and change the number.			● When initialisation is finished, “NO IMAGES
6 Press	or	to select	STORED” appears.
			● To cancel initialisation, select “RETURN”.
“RETURN”, and press
			CAUTION:
SET. The “SAVE?”
appears.			Do not perform any other operation (such as
● If you did not change any			turning off the camcorder) during initialisation.
settings in step 3 through			Also, be sure to use the provided AC Adapter, as
5, the DPOF Menu			the memory card may be corrupted if the battery
reappears.			becomes exhausted during initialisation. If the
7 Press	or	to select “EXECUTE” to save	memory card becomes corrupted, initialise it.

the setting you have just made, and press SET.

DIGITAL STILL CAMERA (D.S.C.) RECORDING & PLAYBACK

●To cancel selection, select “CANCEL”.