JVC GR-DX307, GR-DX107 Buttons And Functions, Installing The Battery, Appear on the connected TV

Page 19

VIDEO PLAYBACK EN 19

To choose whether or not the following displays

Buttons And Functions

appear on the connected TV

 

 

● Date/Time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 27, 31) Or, press DISPLAY on the remote control to turn on/off the date indication.

● Time Code

Set “TIME CODE” to “ON” or “OFF”. ( pg. 27, 31) ● Indications other than date/time and time code

Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 27, 31)

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 11)

●To monitor the picture and sound from the camcorder without inserting a tape or memory card, set the camcorder’s Power Switch to “A” or “M”, then set your TV to the appropriate input mode.

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

Playback Using The Remote Control

The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible. ( pg. 20)

Installing The Battery

A Infrared beam transmitting window

●Transmits the beam signal.

The following buttons are available only when the camcorder’s Power Switch is set to “PLAY”.

B PAUSE Button

●Pauses the tape ( pg. 20)

Up Button ( pg. 20)

C SLOW Rewind Button ( pg. 20)

D REW Button

●Rewind/Reverse Shuttle Search on a tape ( pg. 18)

●Displays previous file in a memory card ( pg. 22)

Left Button ( pg. 20)

E INSERT Button ( pg. 40)

F SHIFT Button ( pg. 20, 41)

G DISPLAY Button ( pg. 19, 37, 42)

H SLOW Forward Button ( pg. 20)

I PLAY Button

VIDEO RECORDING & PLAYBACK

The remote control uses one lithium battery (CR2025).

1 Pull out the battery holder by pushing the lock tab.

2 Insert the battery in the holder, and be sure to have the “+” mark visible.

3 Slide the holder back in until you hear a click.

2

1

1 3

Lock tab

●Starts Playback of a tape ( pg. 17)

●Starts Auto Playback of images in a memory card ( pg. 22)

J FF Button

●Forward/Forward Shuttle Search on a tape ( pg. 18)

●Displays next file in a memory card ( pg. 22)

Right Button ( pg. 20)

K A. DUB Button ( pg. 40)

L STOP Button

● Stops the tape ( pg. 17)

● Stops Auto Playback ( pg. 22)

Down Button ( pg. 20)

Beam Effective Area (indoor use)

 

When using the remote control,

 

be sure to point it at the remote

 

sensor. The transmitted beam’s

 

approximate effective distance for

 

indoor use is 5 m.

 

NOTE:

Remote sensor

The transmitted beam may not be effective or may cause incorrect

operation when the remote sensor is directly exposed to sunlight or powerful lighting.

M EFFECT Button ( pg. 20)

N EFFECT ON/OFF Button ( pg. 20)

The following buttons are available when the camcorder’s Power Switch is set to “A” or “M”.

a Zoom (T/W) Buttons Zoom in/out ( pg. 16, 20)

(Also available with the Power Switch set to “PLAY”) b START/STOP Button

Functions the same as the Recording Start/Stop Button on the camcorder.

c S.SHOT Button

Functions the same as SNAPSHOT on the camcorder. (Also available with the Power Switch set to “PLAY”)

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Dear Customer To deactivate the demonstration, set Demo Mode to OFFNavigation Function Wipe/Fader EffectsBacklight Compensation Program AE with Special EffectsBlue to N Neutral or Black Brown to L Live or Red Important for owners in the U.KIt is recommended that you use JVC brand cassette tapes Before Using This CamcorderReferences Index When Using the LCD MonitorEN Getting Started Other Parts ConnectorsIndicators ControlsCL IP During D.S.C. Recording OnlyDuring E-Mail Clip Recording During Both Video And D.S.C. RecordingBR I GHT During Video PlaybackDuring D.S.C. Playback MICUSB cable How To Attach The Lens CapHow To Use The Audio Extension Cable Audio Extension CableUsing AC Power PowerCharging The Battery Pack Using The Battery PackDate/Time Settings Operation ModePower-Linked Operation Started Grip AdjustmentViewfinder Adjustment Tripod MountingTo protect valuable files available only for SD Memory Card Loading/Unloading a CassetteTo protect valuable recordings Close the card coverTape Remaining Time Basic RecordingLCD Monitor And Viewfinder Interface Shooting EN Video RecordingZooming Journalistic ShootingVideo Playback EN Normal PlaybackTime Code Recording From The Middle Of a TapeEN Video Playback If using a VCR, go to . If not, go to stepShuttle Search Connections To a TV Or VCR Appear on the connected TV Installing The BatteryButtons And Functions To choose whether or not the following displaysPlayback Zoom Playback Special EffectsSlow-Motion Playback Frame-By-Frame PlaybackApproximate Number of Storable Images To cancel Interval Shooting modeC. Recording EN Interval ShootingEN D.S.C. Playback Normal Playback Of ImagesAuto Playback Of Images Playback Of Video ClipsRemoving On-Screen Display Index Playback Of FilesViewing File Information Dubbing Still Images Recorded On a Tape To a Memory Card Resetting The File NameTo reset the file name Mail Clip RecordingDeleting Files Protecting FilesTo Remove Protection To Print By Selecting Still Images And Number Of Prints EN Additional Features for D.S.CTo Reset The Number Of Prints Initialising a Memory CardFor Video and D.S.C. Recording Menus Changing The Menu SettingsMenus without Sub Menus Menus with Sub Menus5SEC / 15SEC / 30SEC / 60SEC EN Menus for Detailed AdjustmentRecording Menus Auto pg , Brightness Adjustment Of The Display Wide ModeImage SEL. / Tape SEL. / ALL / Return Sound Mode and NarrationPlayback Menus Fine / StandardOFF / Auto / on Self-TimerLED Light OFF / LCD / LCD/TVSnapshot For Video Recording EN Features for RecordingSecond Recording Night-ScopeSpot Exposure Control Exposure ControlIris Lock Backlight CompensationTo return to automatic white balance White Balance AdjustmentTo change the setting Wipe Or Fader EffectsVariable Shutter Speed 1/250 1/4000 Program AE With Special EffectsNavigation Function SportsTo delete thumbnail images To cancel Navigation search midwayTo make thumbnail images after video recording manually To use this camcorder as a recorder Dubbing To Or From a VCREditing EN To use this camcorder as a playerManual DubbingEN Editing Any image or sound deteriorationNever disconnect the USB cable while Connection To a Personal Computer Using USB cableUsing DV cable Using USB cable Using DV cableTo end Insert Editing, press START/STOP, then Stop Audio DubbingInsert Editing Set Narration to on or MIX.  pgYou are now ready to try Random Assemble Editing VCR Code ListSet Remote/VCR Code Buttons And Functions RM-V717UMake Connections A JVC VCR equipped with a Remote Pause connectorVCR other than above RM-V717U optional If using a Wipe/Fader atWhen the one you want is Select ScenesDiagnosing VCR/Camcorder Timing Adjustment Of VCR/Camcorder TimingAutomatic Editing To VCR For More Accurate EditingAdvanced features PowerVideo and D.S.C. Recording Other problems EN TroubleshootingRecorded in the LP mode.  pg Appears when no tape is loaded.  pgAppears when the tape ends during recording or playback Appears if Audio Dubbing is attempted on a tapeTo clean the LCD monitor Cleaning The CamcorderUser Maintenance To clean the exteriorMemory Cards Battery PacksMain Unit How To Handle a CD-ROMEN Cautions LCD MonitorAC Adapter CamcorderUSB Recording Capacity Terms16, 20
Top Page Image Contents