JVC GR-DX317 Appears if Audio Dubbing is attempted on a tape, Recorded in the LP mode.  pg

Page 47

 

 

 

 

 

 

 

 

TROUBLESHOOTING

EN 47

Warning Indications

 

 

 

 

 

 

 

 

 

 

 

A. DUB ERROR!

 

 

 

 

 

 

 

 

<CANNOT DUB ON A LP RECORDED TAPE>

 

 

 

 

 

 

 

 

<CANNOT DUB ON A 16BIT RECORDING>

 

 

 

 

 

 

 

 

<CHECK TAPE’S ERASE PROTECTION TAB>

Displays the battery remaining power.

 

 

 

 

 

 

 

 

 

 

● Appears if Audio Dubbing is attempted on a tape

Remaining power level

 

 

 

 

 

 

recorded in the LP mode. ( pg. 40)

 

 

 

 

 

 

 

 

High

 

Exhausted

 

● Appears if Audio Dubbing is attempted on a tape

As the battery power comes close to nil, the battery

 

recorded in 16-BIT audio. ( pg. 40)

indicator blinks.

 

 

 

● Appears if A. DUB (D) on the remote control is pressed

When the battery power is exhausted, power turns off

 

when the erase protection tab is set to “SAVE”.

automatically.

 

 

 

( pg. 40)

INSERT ERROR!

Appears when no tape is loaded. ( pg. 14)

CHECK TAPE’S ERASE PROTECTION TAB

Appears when the erase protection tab is set to “SAVE” while the Power Switch is set to “A” or “M” and the VIDEO/MEMORY Switch is set to “VIDEO”. ( pg. 12)

USE CLEANING CASSETTE

Appears if dirt is detected on the heads during recording. Use an optional cleaning cassette. ( pg. 50)

CONDENSATION OPERATION PAUSED PLEASE WAIT

Appears if condensation occurs. When this indication is displayed, wait more than 1 hour until condensation disappears.

TAPE!

Appears if a tape is not loaded when the Recording Start/ Stop Button or SNAPSHOT Button is pressed while the Power Switch is set to “A” or “M” and the VIDEO/ MEMORY Switch is set to “VIDEO”.

TAPE END

Appears when the tape ends during recording or playback.

SET DATE/TIME!

●Appears when the date/time is not set. ( pg. 12)

●Appears when the built-in clock (lithium) battery is discharged and the previously set date/time is erased. ( pg. 12)

LENS CAP

Appears for 5 seconds after power is turned on if the lens cap is attached or when it is dark.

A. DUB ERROR!

Appears if Audio Dubbing is attempted on a blank portion of a tape. ( pg. 40)

Appears if Insert Editing is attempted on a blank portion of a tape. ( pg. 40)

INSERT ERROR!

<CANNOT EDIT ON A BLANK PORTION> <CANNOT EDIT ON A LP RECORDED TAPE> <CHECK TAPE’S ERASE PROTECTION TAB>

●Appears if Insert Editing is attempted on a blank portion of a tape.

●Appears if Insert Editing is attempted on a tape recorded in the LP mode. ( pg. 40)

●Appears if INSERT (I) on the remote control is pressed when the erase protection tab is set to “SAVE”. ( pg. 40)

MEMORY IS FULL

Appears when the memory card’s memory is full and shooting is not possible.

COPYING FAILED

●Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recorder.

●Appears in the following cases when dubbing from a tape to a memory card (as digital stills or video clips):

•when no memory card is loaded.

•when the memory card’s memory is full.

•when the memory card is not formatted.

•when a write-protected SD Memory Card is loaded. ( pg. 24)

MEMORY CARD!

Appears if there is no memory card loaded when you attempt to record on a memory card or access data on a memory card.

PLEASE FORMAT

Appears when there is a problem with a memory card and its memory is corrupt, or it has not been initialised. Initialise the memory card. ( pg. 26)

NO IMAGES STORED

Appears if there are no image files stored in the memory card when you attempt memory card playback.

REFERENCES

Page 46 Page 48
Image 47
Page 46 Page 48
Contents Dear Customer To deactivate the demonstration, set Demo Mode to OFFNavigation Function Wipe/Fader EffectsBacklight Compensation Program AE with Special EffectsBlue to N Neutral or Black Brown to L Live or Red Important for owners in the U.KIt is recommended that you use JVC brand cassette tapes Before Using This CamcorderReferences EN Getting Started When Using the LCD MonitorIndex Other Parts ConnectorsIndicators ControlsCL IP During D.S.C. Recording OnlyDuring E-Mail Clip Recording During Both Video And D.S.C. RecordingBR I GHT During Video PlaybackDuring D.S.C. Playback MICUSB cable How To Attach The Lens CapHow To Use The Audio Extension Cable Audio Extension CableUsing AC Power PowerCharging The Battery Pack Using The Battery PackPower-Linked Operation Operation ModeDate/Time Settings Started Grip AdjustmentViewfinder Adjustment Tripod MountingTo protect valuable files available only for SD Memory Card Loading/Unloading a CassetteTo protect valuable recordings Close the card coverLCD Monitor And Viewfinder Basic RecordingTape Remaining Time Interface Shooting EN Video RecordingZooming Journalistic ShootingVideo Playback EN Normal PlaybackTime Code Recording From The Middle Of a TapeShuttle Search Connections To a TV Or VCR If using a VCR, go to . If not, go to stepEN Video Playback Appear on the connected TV Installing The BatteryButtons And Functions To choose whether or not the following displaysPlayback Zoom Playback Special EffectsSlow-Motion Playback Frame-By-Frame PlaybackApproximate Number of Storable Images To cancel Interval Shooting modeC. Recording EN Interval ShootingEN D.S.C. Playback Normal Playback Of ImagesAuto Playback Of Images Playback Of Video ClipsViewing File Information Index Playback Of FilesRemoving On-Screen Display Dubbing Still Images Recorded On a Tape To a Memory Card Resetting The File NameTo reset the file name Mail Clip RecordingTo Remove Protection Protecting FilesDeleting Files To Print By Selecting Still Images And Number Of Prints EN Additional Features for D.S.CTo Reset The Number Of Prints Initialising a Memory CardFor Video and D.S.C. Recording Menus Changing The Menu SettingsMenus without Sub Menus Menus with Sub Menus5SEC / 15SEC / 30SEC / 60SEC EN Menus for Detailed AdjustmentRecording Menus Auto pg , Brightness Adjustment Of The Display Wide ModeImage SEL. / Tape SEL. / ALL / Return Sound Mode and NarrationPlayback Menus Fine / StandardOFF / Auto / on Self-TimerLED Light OFF / LCD / LCD/TVSnapshot For Video Recording EN Features for RecordingSecond Recording Night-ScopeSpot Exposure Control Exposure ControlIris Lock Backlight CompensationTo return to automatic white balance White Balance AdjustmentTo change the setting Wipe Or Fader EffectsVariable Shutter Speed 1/250 1/4000 Program AE With Special EffectsNavigation Function SportsTo make thumbnail images after video recording manually To cancel Navigation search midwayTo delete thumbnail images To use this camcorder as a recorder Dubbing To Or From a VCREditing EN To use this camcorder as a playerManual DubbingEN Editing Any image or sound deteriorationNever disconnect the USB cable while Connection To a Personal Computer Using USB cableUsing DV cable Using USB cable Using DV cableTo end Insert Editing, press START/STOP, then Stop Audio DubbingInsert Editing Set Narration to on or MIX.  pgYou are now ready to try Random Assemble Editing VCR Code ListSet Remote/VCR Code Buttons And Functions RM-V717UVCR other than above A JVC VCR equipped with a Remote Pause connectorMake Connections RM-V717U optional If using a Wipe/Fader atWhen the one you want is Select ScenesDiagnosing VCR/Camcorder Timing Adjustment Of VCR/Camcorder TimingAutomatic Editing To VCR For More Accurate EditingVideo and D.S.C. Recording PowerAdvanced features Other problems EN TroubleshootingRecorded in the LP mode.  pg Appears when no tape is loaded.  pgAppears when the tape ends during recording or playback Appears if Audio Dubbing is attempted on a tapeTo clean the LCD monitor Cleaning The CamcorderUser Maintenance To clean the exteriorMemory Cards Battery PacksMain Unit How To Handle a CD-ROMEN Cautions LCD MonitorUSB CamcorderAC Adapter 16, 20 TermsRecording Capacity
Top Page Image Contents