EN15
SET/SELECT Button | MENU Button |
| +, – Button |
Power lamp
Power Switch
Lock Button
Display
CAMERA Menu
REC MODE | – | SP |
|
| LP |
Sub Menu
Recording Mode Setting
Set the tape recording mode depending on your preference.
1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch, then open the LCD monitor fully or pull out the viewfinder fully. The power lamp lights and the camcorder is turned on.
2 Press MENU. The Menu Screen appears.
3 Press + or – to select “ CAMERA” and press SET/ SELECT. The CAMERA Menu appears.
4 Press + or – to select “REC MODE” and press SET/ SELECT. The Sub Menu appears. Select “SP” or “LP” by pressing + or – and press SET/SELECT. Press + or
–to select “RETURN”, and press SET/SELECT twice. The Menu Screen closes.
•Audio Dubbing ( pg. 66) and Insert Editing ( pg. 68) are impossible on a tape recorded in the LP mode.
•“LP” (Long Play) is more economical, providing
1.5times the recording time.
NOTES:
●If the recording mode is switched during recording, the playback picture will be blurred at the switching point.
●It is recommended that tapes recorded in the LP mode on this camcorder be played back on this camcorder.
●During playback of a tape recorded on another camcorder, blocks of noise may appear or there may be momentary pauses in the sound.