JVC GR-DVP3 28 EN, Basic Shooting Snapshot, Snapshot Mode Selection, Snapshot Recording

28 EN D.S.C. RECORDING

VIDEO/MEMORY

Switch

Power Switch

Lock Button

SNAPSHOT Button

Display

CAMERA Menu

SNAP MODE – P I N–UP

FRAME

FULL

MULT I – 4

MULT I – 9

Basic Shooting (Snapshot)

You can use your camcorder as a Digital Still Camera for taking snapshots.

NOTE:

You should already have performed the procedures listed below. If not, do so before continuing.

●Power (
pg. 10)

●Grip Adjustment (
pg. 12)

●Viewfinder Adjustment (
pg. 12)

●Loading A Memory Card (
pg. 16)

●Picture Quality/Image Size Mode Setting (
pg. 17)

SNAPSHOT MODE SELECTION

1Slide down the lens cover while pressing down the Lock Button located on the cover. Set the VIDEO/ MEMORY Switch to “MEMORY”, then set the Power Switch to “ ” while pressing down the Lock Button located on the switch. Open the LCD monitor fully or pull out the viewfinder fully.

2Press MENU. The Menu Screen appears.

3Press + or – to select “ CAMERA”, then press SET/ SELECT. The CAMERA Menu appears.

4Press + or – to select “SNAP MODE”, then press

SET/SELECT.

5Press + or – to select the desired Snapshot mode, then press SET/SELECT. Press + or – to select

“RETURN” and press SET/SELECT twice. The Menu Screen closes.

SNAPSHOT RECORDING

Image Size mode					1	Press SNAPSHOT.	appears while the snapshot
Displays the Image Size mode of the stored						is being taken.
image. There are 2 modes available: XGA and						The image is stored in the memory card.
VGA ( pg. 17).						•Regardless of the Power Switch position (“ ” or
		Display				“ ”), Snapshot recording takes place using the
						selected Snapshot mode.
	VGA	F I NE
			1 0 / 10 0	Picture Quality mode
				Displays the Picture Quality mode of the stored image. There are 2 modes
				available: FINE and STD (Standard) ( pg. 17).
				Total number of shots
				Displays the approximate total number of shots that can be stored, including
				those already taken. The number increases or decreases depending on the shots
				stored, the Picture Quality/Image Size mode, etc.

Number of shots taken

Displays the number of images that have already been shot.

Card icon

Appears during shooting and blinks when a memory card is not loaded.

Shooting icon

Appears and blinks during shooting.