JVC GR-DVP3 Video/Memory, Switch is set to Memory  pg, Card, For image is selected E01 E06

Page 92

92 EN

INDEX Indications (cont.)

 

Indications

Function

 

 

 

 

 

INSERT ERROR!

Appears if Insert Editing is attempted on a tape recorded in the LP

 

<CANNOT EDIT

mode.

( pg. 68)

 

ON A LP RECORDED

Appears if INSERT (w) on the remote control is pressed when the erase

 

TAPE>

 

<CHECK TAPE’S ERASE

protection tab is set to “SAVE”.

( pg. 68)

 

PROTECTION TAB>

 

 

 

 

 

 

 

Appears if dubbing of copyguarded signals is attempted while this

 

 

camcorder is being used as a recorder.

 

 

 

Appears in the following cases when dubbing from a tape to a memory

 

COPYING FAILED

card (as digital stills or video clips):

 

 

– when no memory card is loaded.

 

 

 

 

 

 

– when the memory card's memory is full.

 

 

 

– when the memory card is not formatted.

 

 

 

– when a copy-protected SD Memory Card is loaded. ( pg. 60, 61)

 

 

 

 

 

Appears if a memory card is not loaded when SNAPSHOT is pressed

 

MEMORY CARD!

while the Power Switch is set to “ ” or “

” and the VIDEO/MEMORY

 

 

Switch is set to “MEMORY”.

( pg. 28)

 

 

 

 

PLEASE

Appears when there is a problem with a memory card and its memory is

 

corrupt, or it has not been initialized. Initialize the memory card.

 

FORMAT

 

 

( pg. 38)

 

 

 

 

 

 

 

 

 

Appears when the Power Switch is set to “

” and the VIDEO/MEMORY

 

 

Switch is set to “MEMORY” if there are no image files stored in the memory

 

NO FILES STORED

card.

 

 

Appears if there are no video clip files stored in the memory card when

 

 

 

 

the video clip mode is engaged by pressing the SET/SELECT button.

 

 

Appears after a memory card is initialized.

 

 

 

 

 

 

Appears if there are no sound files stored in the memory card when the

 

NO SOUND FILES

sound effect mode is engaged by pressing the SET/SELECT button or

 

 

D.SOUND is pressed during video recording.

 

 

 

 

Unsupported file!

Appears when a file in a format other than MP3 for digital sound or DCF

 

for image is selected.

 

 

 

 

 

 

 

 

E01 — E06

The error indications (E01 — E06) show what type of malfunction has

 

occured. When an error indication appears, the camcorder turns off

 

UNIT IN SAFEGUARD

 

MODE REMOVE AND

automatically. Remove the power supply (battery, etc.) and wait a few

 

REATTACH BATTERY

minutes for the indication to clear. When it does, you can resume using

 

 

the camcorder. If the indication remains, consult your nearest JVC dealer.

 

 

 

 

 

Appears when the camcorder takes more than 60 seconds to recognize

 

CARD ERROR!

the loaded memory card. Remove the memory card once and insert it

 

again. Repeat these procedures until no indication appears. If the

 

 

 

 

indication still appears, the memory card is corrupted.

 

 

 

 

CHECK CARD'S WRITE

Appears when you attempt to shoot digital still images while a copy-

 

PROTECTION SWITCH

protected SD Memory Card is loaded.

 

 

 

 

 

Image 92
Contents GR-DVP3 Dear Customer It is recommended that youBefore recording an important scene Power Sources Power Cord ProtectionPower Lines Grounding or PolarizationAccessories Damage Requiring ServiceCleaning Replacement PartsProvided Accessories How To Attach The Grip Belt How To Attach The StrapAdjust the length with the adjuster Remove the pad and separate the two strapsPress + or to select OFF and press SET SelectGetting Started Power Charging the Battery PackLithium-ion is vulnerable in colder temperatures About BatteriesUsing the Battery Pack Using AC PowerTo Detach The Battery Pack EN11Grip Adjustment Viewfinder Adjustment12 EN Tripod MountingEN13 Date/Time SettingsBuilt-in Clock’s Rechargeable Lithium Battery Slide the erase protection tab on the back 14 ENLoading/Unloading a Cassette Recording Mode Setting EN15To Unload a Memory Card 16 ENLoading a Memory Card Picture Quality Mode Setting Image Size Mode SettingEN17 Approximate Number of Storable ImagesOperation Mode 18 ENOFF VideoVideo Recording & Playback To Adjust The Brightness Of The Display 20 ENBasic Recording To Stop RecordingEN21 Journalistic ShootingInterface Shooting ZoomProper recording When a blank portion is recorded on a tape22 EN To Control The Speaker Volume Available only with the remote control provided  pgNormal Playback EN2324 EN ConnectionsEN25 Docking Station AttachmentTo cancel Blank Search midway 26 ENBlank Search Press FOCUS/BLANKDigital Still Camera D.S.C Recording Playback Snapshot Mode Selection 28 ENBasic Shooting Snapshot Snapshot RecordingTo Remove The Shutter Sound EN29To Delete Unwanted Still Images 30 EN Normal Playback Of Images100-DVC00003 Directory and File names Selected FileIMAGE/E-CLIP/SOUND Type of File Index number32 EN Index PlaybackJump Playback AgainEN33 To Remove ProtectionTo Select a File by Browsing Files Stored in Memory 34 ENDeleting Files EN35 To Delete the Displayed FileTo Delete ALL Files Before doing the following, perform steps 1 through 3 onTo Print ALL Still Images ONE Print for Each To Reset The Setting36 EN To Print by Selecting Still Images and NO. of Prints To Reset The No. Of PrintsEN37 You can initialize a memory card anytime 38 ENInitializing a Memory Card Advanced Features For Recording Menu If you have selected WIPE/FADER Program AE or W. Balance…see pg If you have selected Camera MANUAL, SYSTEM, Display or DSCEN41 Menu Screen ExplanationsManual System Wide OFF System Display DSC CAM Cancel EN43For Playback Menu On Next pg EN45Display Sound Mode 12BIT Mode Playback SoundInstead of pressing the Recording Start/Stop Button Second RecordingEN47 To Deactivate The Selected Mode 48 ENProgram AE With Special Effects Night AliveEN49 FADE/WIPE Selection 50 ENFade/Wipe Effects Menu Effect EN51Fader And Wipe Menu Motor Drive Mode 52 ENSnapshot For Video Recording If you press during Record-StandbyFeature Auto Focus Feature Manual FocusEN53 To obtain correct focusIris Lock 54 ENExposure Control White Balance Adjustment Manual White Balance OperationEN55 To Return To Automatic White BalanceSound Effect Mode Selection 56 ENDigital Sound Effects Press + or to select the desired sound effectIng the sound effect EN57Sound Effect Recording 58 EN Dubbing To a VCREN59 To use this camcorder as a player60 EN Dubbing Still Images Recorded On a Tape To a Memory CardTo cancel E-Mail Clip Recording Tape To a Memory Card E-Mail Clip RecordingEN61 To view video clips stored in a memory cardInstalling The Batteries 62 ENFunctions EN63Buttons Feature Slow-Motion Playback Feature Frame-By-Frame PlaybackFeature Playback Zoom 64 ENFeature Playback Special Effects EN65To hear the dubbed sound during playback 66 ENAudio Dubbing Audio Dubbing Using Digital Sound Effects EN6768 EN Insert EditingEN69 SET REMOTE/VCR CodeJVC VCR equipped with a Remote Pause connector 70 ENMake Connections VCR other than aboveEN71 Select Scenes72 EN Automatic Editing to VCRAdjustment of VCR/CAMCORDER Timing For More Accurate EditingEN73 Diagnosing VCR/CAMCORDER TimingUsing USB cable Using DV cableUsing USB cable Using DV cableConnection To a Video Unit Equipped With a DV Connector EN7576 EN References pg PowerEN77 78 EN Corrective ActionEN79 CinemaTroubleshooting 80 ENEN81 VIDEO/MEMORY Switch is 82 ENEN83 Cleaning The Camcorder 84 ENAfter Use Push HereMulti Connector Connect the editing cable when performingVideo Output Connector Screw  pg86 EN EN87 Enindex Indications EN89 LCD Monitor/Viewfinder Indications During Video Playback LCD Monitor/Viewfinder Indications During D.S.C. PlaybackEN91 Indications FunctionSwitch is set to Memory  pg VIDEO/MEMORYCard Sound is pressed during video recordingEN93 Using Household AC Plug AdapterTemperature Range Specifications 94 EN EN95 96 EN Sound Mode  pg , 44 EN9798 EN For GeneralFor Digital Video Camera For Digital Still CameraFor Connectors EN99GR-DVP3