JVC GR-DVP3 specifications Using USB cable, Using DV cable

Page 74

74 EN

SYSTEM CONNECTIONS

[A] Using USB cable

 

 

 

USB cable

To USB

To USB

(optional)

connector

 

 

PC

[B] Using DV cable

OR

 

 

 

 

DV cable

To DV

To DV IN/OUT

(optional)

connector

 

Core filter

Core filter

Open the connector cover.

 

PC with DV connector

 

 

Connection To A Personal Computer

[A] Using USB cable

This camcorder can transfer still images to a PC by using the provided software.

[B] Using DV cable

It is also possible to transfer still images to a PC with a DV connector by using software equipped with the PC or commercially available software.

1 Connect the camcorder to your PC using the appropriate cable as shown in the illustration.

2 If you are using the USB connection, set the VIDEO/MEMORY switch to “MEMORY”.

•Only the still images stored in the memory card can be transferred to a PC.

3 Turn the camcorder’s Power Switch to “ ” while pressing down the Lock Button located on the switch and turn on the PC.

•Refer to the instruction manual of the software on how to transfer a still image to the PC.

NOTES:

●It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery pack (  pg. 11).

●Never connect the USB cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●When using a USB cable, be sure to use the YTU94155A USB cable. Consult the JVC Service Center described on the sheet included in the package for details on its availability.

●When using a DV cable, be sure to use the optional JVC VC-VDV206U or VC-VDV204U DV cable depending on the type of DV connector (4 or 6 pins) on the PC, or use the DV cable provided with the capture board.

●If the PC connected to the camcorder via the USB cable is not powered, the camcorder does not enter the USB mode.

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the PC and Software.

●The still images can also be transferred to a PC with a DV connector-equipped capture board.

●The system may not work properly depending on the PC or capture board you are using.

“USB MODE” and/or “ACCESSING FILE” appears on the LCD monitor while the PC is accessing data in the camcorder or the camcorder is transferring a file to the PC.

NEVER disconnect the USB cable while “ACCESS- ING FILE” is displayed on the LCD monitor since this can result in product damage.

Page 73 Page 75
Image 74
Page 73 Page 75
Contents GR-DVP3 Dear Customer It is recommended that youBefore recording an important scene Power Lines Power SourcesPower Cord Protection Grounding or PolarizationCleaning AccessoriesDamage Requiring Service Replacement PartsProvided Accessories Adjust the length with the adjuster How To Attach The Grip BeltHow To Attach The Strap Remove the pad and separate the two strapsPress + or to select OFF and press SET SelectGetting Started Lithium-ion is vulnerable in colder temperatures PowerCharging the Battery Pack About BatteriesTo Detach The Battery Pack Using the Battery PackUsing AC Power EN1112 EN Grip AdjustmentViewfinder Adjustment Tripod MountingEN13 Date/Time SettingsBuilt-in Clock’s Rechargeable Lithium Battery Slide the erase protection tab on the back 14 ENLoading/Unloading a Cassette Recording Mode Setting EN15To Unload a Memory Card 16 ENLoading a Memory Card EN17 Picture Quality Mode SettingImage Size Mode Setting Approximate Number of Storable ImagesOFF Operation Mode18 EN VideoVideo Recording & Playback Basic Recording To Adjust The Brightness Of The Display20 EN To Stop RecordingInterface Shooting EN21Journalistic Shooting ZoomProper recording When a blank portion is recorded on a tape22 EN Normal Playback To Control The Speaker VolumeAvailable only with the remote control provided  pg EN2324 EN ConnectionsEN25 Docking Station AttachmentBlank Search To cancel Blank Search midway26 EN Press FOCUS/BLANKDigital Still Camera D.S.C Recording Playback Basic Shooting Snapshot Snapshot Mode Selection28 EN Snapshot RecordingTo Remove The Shutter Sound EN29To Delete Unwanted Still Images 30 EN Normal Playback Of ImagesIMAGE/E-CLIP/SOUND Type of File 100-DVC00003 Directory and File namesSelected File Index numberJump Playback 32 ENIndex Playback AgainEN33 To Remove ProtectionTo Select a File by Browsing Files Stored in Memory 34 ENDeleting Files To Delete ALL Files EN35To Delete the Displayed File Before doing the following, perform steps 1 through 3 onTo Print ALL Still Images ONE Print for Each To Reset The Setting36 EN To Print by Selecting Still Images and NO. of Prints To Reset The No. Of PrintsEN37 You can initialize a memory card anytime 38 ENInitializing a Memory Card Advanced Features …see pg For Recording MenuIf you have selected WIPE/FADER Program AE or W. Balance If you have selected Camera MANUAL, SYSTEM, Display or DSCEN41 Menu Screen ExplanationsManual System Wide OFF System Display DSC CAM Cancel EN43For Playback Menu On Next pg EN45Display Sound Mode 12BIT Mode Playback SoundInstead of pressing the Recording Start/Stop Button Second RecordingEN47 Program AE With Special Effects To Deactivate The Selected Mode48 EN Night AliveEN49 FADE/WIPE Selection 50 ENFade/Wipe Effects Menu Effect EN51Fader And Wipe Menu Snapshot For Video Recording Motor Drive Mode52 EN If you press during Record-StandbyEN53 Feature Auto FocusFeature Manual Focus To obtain correct focusIris Lock 54 ENExposure Control EN55 White Balance AdjustmentManual White Balance Operation To Return To Automatic White BalanceDigital Sound Effects Sound Effect Mode Selection56 EN Press + or to select the desired sound effectIng the sound effect EN57Sound Effect Recording 58 EN Dubbing To a VCREN59 To use this camcorder as a player60 EN Dubbing Still Images Recorded On a Tape To a Memory CardEN61 To cancel E-Mail Clip RecordingTape To a Memory Card E-Mail Clip Recording To view video clips stored in a memory cardInstalling The Batteries 62 ENFunctions EN63Buttons Feature Playback Zoom Feature Slow-Motion PlaybackFeature Frame-By-Frame Playback 64 ENFeature Playback Special Effects EN65To hear the dubbed sound during playback 66 ENAudio Dubbing Audio Dubbing Using Digital Sound Effects EN6768 EN Insert EditingEN69 SET REMOTE/VCR CodeMake Connections JVC VCR equipped with a Remote Pause connector70 EN VCR other than aboveEN71 Select Scenes72 EN Automatic Editing to VCREN73 Adjustment of VCR/CAMCORDER TimingFor More Accurate Editing Diagnosing VCR/CAMCORDER TimingUsing USB cable Using USB cableUsing DV cable Using DV cableConnection To a Video Unit Equipped With a DV Connector EN7576 EN References pg PowerEN77 78 EN Corrective ActionEN79 CinemaTroubleshooting 80 ENEN81 VIDEO/MEMORY Switch is 82 ENEN83 After Use Cleaning The Camcorder84 EN Push HereVideo Output Connector Multi ConnectorConnect the editing cable when performing Screw  pg86 EN EN87 Enindex Indications EN89 LCD Monitor/Viewfinder Indications During Video Playback LCD Monitor/Viewfinder Indications During D.S.C. PlaybackEN91 Indications FunctionCard Switch is set to Memory  pgVIDEO/MEMORY Sound is pressed during video recordingEN93 Using Household AC Plug AdapterTemperature Range Specifications 94 EN EN95 96 EN Sound Mode  pg , 44 EN97For Digital Video Camera 98 ENFor General For Digital Still CameraFor Connectors EN99GR-DVP3
Top Page Image Contents