JVC GR-DVP3 specifications Press + or to select OFF and press SET, Select

8 EN

AUTOMATIC DEMONSTRATION

Automatic Demonstration takes place when “DEMO MODE” is set to “ON” (factory-preset).

Available when the Power Switch is set to “” or “ ” and no cassette is in the camcorder.

Performing any operation during the demon- stration stops the demonstration temporarily. If no operation is performed for more than 1 minute after that, the demonstration will resume.

“DEMO MODE” remains “ON” even if the camcorder power is turned off.

To cancel Automatic Demonstration:

1.Set the Power Switch to “ ” while pressing down the Lock Button located on the switch and press MENU. The Menu Screen appears.

2.Press + or – to select “ SYSTEM” and press SET/SELECT. The SYSTEM Menu appears.

3.Press + or – to select “DEMO MODE” and press SET/SELECT. The Sub Menu appears.

4.Press + or – to select “OFF” and press SET/

SELECT.

5.Press + or – to select “ RETURN”, and press SET/SELECT twice. The normal screen appears.

NOTE:

If you do not slide the lens cover down, you cannot see the actual changes of the Automatic Demonstration activated on the LCD monitor or viewfinder.

MENU Button

SET/SELECT Button +, – Button

Power Switch

Lock Button

Sub Menu

DEMO MODE – OF F

ON