JVC GR-DVP3 specifications Manual System Wide OFF

42 EN USING MENUS FOR DETAILED ADJUSTMENT (cont.)

Menu Screen Explanations (cont.)

MANUAL

SYSTEM

WIDE	OFF	Records with no change in the screen ratio. For playback on a TV with a
MODE		normal screen ratio.
	CINEMA	Inserts black bands at the top and bottom of the screen. During playback on
		wide-screen TVs, the black bands at the top and bottom of the screen are
		cut and the screen ratio becomes 16:9.	appears. When using this
		mode, refer to your wide-screen TV’s instruction manual. During playback/
		recording on 4:3 TVs/LCD monitor/viewfinder, black bands are inserted at
		the top and bottom of the screen and the image appears like a letterboxed
		16:9 movie.
		•“CINEMA” mode is effective only when the VIDEO/MEMORY Switch is
		set to “VIDEO”.
	SQUEEZE	For playback on TVs with an aspect ratio of 16:9. Naturally expands the
		image to fit the screen without distortion.	appears. When using this
		mode, refer to your wide-screen TV’s instruction manual. During playback/
		recording on 4:3 TVs/LCD monitor/viewfinder, the image is elongated
		vertically.
		•“SQUEEZE” mode is effective only when the VIDEO/MEMORY Switch is
		set to “VIDEO”.
WIND	OFF	Disengages the function which cuts down on noise created by wind.
CUT
	ON	Helps cut down on noise created by wind. “	” appears. The quality of
		the sound will change. This is normal.
BEEP	OFF	Even though not heard while shooting, shutter sound is recorded on the
		tape.
	BEEP	The beep sounds when the power is turned on or off, and at the beginning
		and end of recording. Also to activate the shutter sound effect ( pg. 28,
		52).
	MELODY	Instead of a beep, a melody sounds when any operation is performed. It
		also activates the shutter sound effect ( pg. 28, 52).
TALLY	OFF	The tally lamp remains off at all times.
	ON	The tally lamp comes on to signal the start of recording.
DEMO	OFF	Automatic demonstration will not take place.
MODE
	ON	Demonstrates certain functions such as Program AE with special effects,
		etc., and can be used to confirm how these functions operate. When
		“DEMO MODE” is set to “ON” and the Menu Screen is closed, demonstra-
		tion starts. Performing any operation during the demonstration stops the
		demonstration temporarily. If no operation is performed for more than 1
		minute after that, the demonstration will resume.
		NOTES:
		● If a tape is in the camcorder, the demonstration cannot be turned on.
		● “DEMO MODE” remains “ON” even if the camcorder power is turned
		off.
		● If “DEMO MODE” remains “ON”, some functions will not be available.
		After viewing demo, set to “OFF”.