EN37
VIDEO/MEMORY |
Switch |
Power Switch
| Lock Button |
| MENU Button |
SET/SELECT | +, – Button |
Button |
|
|
|
| Number of prints | |
|
| Display |
| DPOF Index | |
E X I T |
| D P O F |
| ||
| VGA | Screen | |||
|
| ||||
19 | 00 | 20 | 00 | 21 |
|
22 | 00 | 23 | 00 | 24 | 00 |
|
| DPOF |
| Confirmation | |
SELECT |
| – | CANCEL | Screen | |
|
| ||||
|
|
|
| EXECUTE | |
TO PRINT BY SELECTING STILL IMAGES AND NO. OF PRINTS
1Perform steps 1 through 4 on pg. 36.
2Press + or – to selsect “SELECT” and press SET/ SELECT. Selection is complete. The DPOF Index Screen appears.
3Press + or – to move the green frame to the image you wish to print and press SET/SELECT.
4Select the number of prints by pressing + to increase the number, or – to decrease the number and press
SET/SELECT.
Repeat steps 3 and 4 for the desired number of prints.
•The number of prints can be set up to 15.
•To correct the number of prints, select the image again and change the number.
5Press + to select “EXIT” and press SET/SELECT. Selection is complete. The Confirmation Screen appears.
6Press + or – to select “EXECUTE” and press SET/ SELECT. The normal playback screen appears.
•To cancel selection, press + or – to select “CAN- CEL” and press SET/SELECT.
To Reset The No. Of Prints . . .
.... select “RESET” in step 5 on pg. 36. The number of
prints is reset to 0 for all still images.
CAUTION:
While performing the above, never disconnect power, as this may cause the memory to be corrupted.
NOTES:
●If you load a memory card already set as shown above in a printer compatible with DPOF, it will make prints of the selected still images automatically.
●To print images recorded on a tape, first dub them to a memory card ( pg. 60).