JVC GR-SXM930, GR-SXM730 EN29, To remove the still image you have checked Instant Delete

DSC

F I NE 1 5Remaining number of shots

60 591 0

(Blinking)

Pictrue mode display

D.S.C. mode indicator

FULL*

(Snapshot mode with no frame)

PIN-UP* (Pin-Up mode)

MULTI-4** (Multi-Analyzer 4)

MULTI-9** (Multi-Analyzer 9)

EN29

NOTES:

●Some sample images have been stored in the built-in

memory at the factory. If you wish to delete them, first remove the “Protecting Images” function (
pg. 32), then perform the “Deleting Images” function (
pg.

33).

●If a Snapshot is taken while the camcorder is in the WIDE mode (
pg. 41), the Snapshot image is recorded without the black bars at the top and bottom of the screen.

●When you shoot in a dark environment, the still image will become coarse and its true colors will be lost.

●During the D.S.C. recording, the Zooming (
pg. 20), Picture Stabilizer (
pg. 20) and Video Light

(
pg. 21) functions can be operated.

●Still images are taken in a format based on JPEG (Joint Photographic Experts Group).

●When you use the LCD monitor outdoors under direct sunlight, the LCD monitor may be difficult to see. If this happens, close the LCD monitor and use the viewfinder instead.

●To store the still images you shot, we recommend that

you transfer them to a computer and save them on disk (
pg. 34), or transfer them to a VCR connected to the camcorder and record them onto a tape.

●Image data stored in the camcorder’s built-in memory can be transferred to a Windows® PC and saved using

the provided image transfer software, Picture Navigator (
pg. 34).

*There is a momentary camera shutter-type blackout together with the image.

**Continuous camera shutter-type blackout takes place 4 or 9 times with the image, like serial photography, then the 4 or 9 still images you took are displayed.

Quick Review (for still images stored in the built-in memory): To check the still

image most recently stored in the built-in memory.

1)Set the Power Switch to “ ” or “ ”. If the DSC Lamp is not lit, press REFRESH for approx. 1 second to select “DSC”.

2)Press 2and release quickly.

●The still image is displayed for approx. 3 seconds. The message “DELETE OK? PRESS PLAY BUTTON” appears.

To remove the still image you have checked (Instant Delete) . . .

Press 4/6while the message “DELETE OK? PRESS PLAY BUTTON” is displayed.