JVC GR-SXM930, GR-SXM730 specifications EN41, Menu Screen Explanations, Camera Menu, System Menu

		EN41
MENU SCREEN EXPLANATIONS
CAMERA MENU
FOCUS	Refer to “Focusing” ( pg. 45).
EXPOSURE	Refer to “Exposure Control” ( pg. 44).
M.W.B.	Refer to “White Balance Adjustment” and “Manual White Balance Operation”
	( pg. 46).
S.LX	MAX	To record a subject in a darkly lit environment, when it is more
		convenient to shoot the subject with a brighter image even if the
		picture becomes slightly coarse.
	NORMAL	To record a subject in a dimly lit environment, when it is more
		convenient to shoot with a less coarse picture although the
		subject becomes slightly dark. This setting is suitable for
		measuring sensitivity conforming to EIA-639 (EIA* Standard for
		Low Light Sensitivity Measurement).
		*EIA : Electronic Industries Alliance
	OFF	Allows you to shoot dark scenes with no picture brightness
		adjustment.
TITLE*	Allows you to superimpose one of eight preset titles ( pg. 47).
DATE/TIME	Makes the date/time settings appear in the camcorder or on a connected monitor
DISP.*	( pg. 47).

SYSTEM MENU

This Menu Screen cannot be accessed while recording.

REC MODE*	Allows you to set the recording mode (SP or EP) depending on your preference
	( pg. 14).
D. ZOOM	50X	Allows you to use the Digital Zoom. By digitally processing and
		magnifying images, zooming is possible from 16X (the optical
		zoom limit), to a maximum of 50X digital magnification.
	400X	Allows you to use the Digital Zoom. By digitally processing and
		magnifying images, zooming is possible from 16X (the optical
		zoom limit), to a maximum of 400X digital magnification.
	OFF	Digital Zoom is not available. Only optical zoom (maximum
		16x magnification) can function. When set to “OFF” during
		Digital Zoom, zoom magnification changes to 16X.
WIDE	OFF	Does not display black bars.
	ON	Allows you to record black bars at the top and bottom of the screen
		to produce a cinema-like “wide-screen” effect. If a snapshot
		( pg. 28, 43) is taken while the camcorder is in the WIDE
		mode, the snapshot image is recorded without the black bars at
		the top and bottom of the screen.

*Activated only when “VIDEO” is selected (the DSC Lamp is not lit). If “DSC” is selected (the DSC Lamp is lit), this function will not be activated even though the highlight bar on the Menu Screen will move to that position.

Functions listed without an asterisk are available when either “DSC” or “VIDEO” is selected.

: Factory-preset

CONTINUED ON NEXT PAGE