JVC GY-DV500 instruction manual Operation Screen, Process Screen

12. SETUP MENU

12-5 OPERATION Screen

Item		Function, Operation	Variation Range	Initial Setting
SHUTTER	The SHUTTER button on the right side section is used to select STEP for		STEP	STEP
	fixed shutter speed or V.SCAN variable scanning rate for shooting computer		VARIABLE
	monitor screens.
	STEP	Enables setting of different fixed shutter speeds.
		[1/100, 1/250, 1/500, 1/1000, 1/2000] : U-ver.
		[1/120, 1/250, 1/500, 1/1000, 1/2000] : E-ver.
	VARIABLE	Selected when shooting computer monitor screens, etc.
		[Variable range: 60.1 to 2084.6 Hz, 60.3 to 2084.6 Hz (V.
		MAX mode)] : U-ver.
		[Variable range: 50.1 to 2067.8 Hz, 50.3 to 2067.8 Hz (V.
		MAX mode)] : E-ver.
FAW	Selects the W.BAL switch (@ on page 13) position to which the FAW (Full-		NONE	NONE
	Time Auto White Balance Adjustment) function is to be assigned.		A
	NONE	FAW function is not used.	B
	A	FAW is assigned to the A position.	PRESET
	B	FAW is assigned to the B position.
	PRESET	FAW is assigned to the PRESET position.
GAIN L	Selects the gain value in each position of the GAIN switch (9 on page		–3dB	L: 0dB
GAIN M	13).		0dB	M: 9dB
GAIN H			6dB	H: 18dB
			9dB
			12dB
			18dB
			ALC
SMOOTH	Smoothens the transition when the GAIN switch (9 on page 13), or		ON	OFF
TRANS	WHT.BAL switch (@) is switched over and achieves gradual change in		OFF
	place of sudden change.
	However, the smooth transition function does not function when switching
	the GAIN switch set in ALC, FAS button and the LOLUX button.
	ON	Activates the smooth transition function.
	OFF	Deactivates the smooth transition function.
PAGE BACK	The CAMERA MENU returns when the SHUTTER dial is pressed with		–	–
	the cursor at this position.

73

12. SETUP MENU

12-6 PROCESS Screen

Item			Function, Operation		Variation Range		Initial Setting
MASTER	Adjusts the pedestal level (master black), which is the reference of black.				MAX (100)		NORMAL
BLACK	• To increase the pedestal level			Increase the number. (UP)	99	201
	• To decrease the pedestal level ....			Decrease the number. (DOWN)		gradations
					to
					NORMAL (0)
					to
					-99
					MIN (-100)
DETAIL	Adjusts the detail enhancement level.				MAX (9)		NORMAL
	• To sharpen details			Increase the number. (UP)	8	16
	• To soften details			Decrease the number. (DOWN)		gradations
					to
					NORMAL (0)
					to
					-5
					MIN (-6)
DTL. V/H	Sets the direction, horizontal (H) or vertical (V), in which stronger detail				H-MAX (4)		NORMAL
BAL	enhancement is applied.				3	9
	To strengthen the H enhancement ...			.. Increase the number (UP).		gradations
	To strengthen the V enhancement ...			.. Decrease the number (DOWN).	to
					NORMAL (0)
		Note:
					to
	While the LOLUX function is operating, the setting value is fixed at
					-3
	NORMAL and “FIX” is displayed.
					H-MIN (-4)
DTL.	Varies the detail enhancement level by changing the detail enhancement				HIGH		MIDDLE
FREQUENCY	frequency. Set in accordance with the subject				MIDDLE
	HIGH		Applies strong detail enhancement.		LOW
			Used to shoot subjects with fine patterns.
	MIDDLE		Applies medium detail enhancement.
	LOW		Applies weak detail enhancement.
			Used to shoot subjects with large patterns.
		Note:
	While the LOLUX function is operating, the setting value is fixed at
	MIDDLE and “FIX” is displayed.
SKIN DTL	Sets the Skin Detail function to ON or OFF.				ON		OFF
DETECT	ON		Skin Detail function activated.		OFF
	OFF		Skin Detail function not activated.

☞See "Using the Skin Detail Function" on page 84.

V.	Increases the vertical resolution.			NORMAL	NORMAL
RESOLUTION	• NORMAL .... Vertical resolution 380 lines.			V.MAX
	• V.MAX		Vertical resolution 450 lines
		Note:
	The sensitivity is degraded and the bright sections may be colored
	depending on the subject.
ADVANCED	ADVANCED PROCESS
PROCESS	Displays the ADVANCED PROCESS Screen.
	☞ See "ADVANCED PROCESS Screen" on page 75.
PAGE BACK	The CAMERA MENU returns when the SHUTTER dial is pressed with			–	–
	the cursor at this position.

74