JVC LYT0216-001B specifications Motor Drive mode, Colour barBAR, Progressive Mode, Colour bar BAR

Pro Snapshot mode with no frame* √

EN29

Pro Snapshot mode	Pin-Up mode √
with frame* √

Multi-Analyzer 4** Multi-Analyzer 9** Colour bar (BAR) ***

*: There is a momentary camera shutter-type blackout together with the sound effect of a shutter closing, which is recorded together with the image.

**: This will be disabled when P.AE/Effects other than “SHUTTER” are activated.

√: Recorded with Progressive mode.

***: This is not Pro Snapshot mode. Colour bar will be recorded until Recording stops. (See below)

Motor Drive mode:

Keeping the Progressive Button pressed provides an effect similar to serial photography. (The interval between the still pictures: approx. 0.7 seconds.)

To Remove The Shutter Sound . . .

.... When you don't want to hear the shutter sound,

set BEEP/TALLY to “OFF” in the system menu (☞ pg. 35). Though the sound is not heard from the speaker, it is recorded on the tape.

Colour bar(BAR)***:

When you turn the Progressive Dial to “BAR” and press START/STOP, the colour bar will be recorded.

This colour bar is useful, when you adjust the colour or the hue of your monitor during playback.

To stop recording the colour bar, press START/STOP again and turn the Progressive Dial to “VIDEO” to start normal recording.

Progressive Mode:

This mode enables recording a jitter-free still image with superior quality, using the Progressive Scan CCD (☞ pg. 30).

The Progressive Mode is activated during Pro Snapshot recordings (except Multi-Analyzer 4 & 9) and Progressive Video Recording (☞ pg. 44).

A recorded high-resolution still image can be transferred to a personal computer and processed using the provided software, or can be printed out using the optional digital printer GV-DT1.

NOTE:

During playback as well, all Pro Snapshot modes are available. The shutter sound is not heard.