EN
63
Random Assemble Editing
Using the
To EDIT jack | To remote | |
pause connecter | ||
|
| Core filter | |
Remote sensor |
| |
Core filter | To AUDIO IN | |
connector (L/R) | ||
| ||
VIDEO/AUDIO | White to AUDIO L | |
cable (provided) | ||
| ||
To AV OUT connector | Red to AUDIO R | |
Core filter To VIDEO IN | Yellow to VIDEO | |
connector |
|
Editing cable (provided)
T W
PLAY
R.A. EDIT
ON/OFF
VCR
(Recording deck)
To | To | |
OUT connector | (provided) | IN connector |
VIDEO OUT select switch (Y/C or CVBS)
Source tape (Camcorder) | New tape (VCR) |
Cable adapter (provided) If your VCR has the
1 MAKE CONNECTIONS
Make sure that the playback picture and sound are available on the connected TV (☞ pg. 56, 57).
•Connections should be made while the power is off. Making connections with the power on can lead to electrical shock or malfunctions.
2 START SOURCE PLAYBACK First turn the Power Dial to “PLAY” while pressing down the lock button located on the dial. Press PLAY and then press R.A. EDIT ON/ OFF on the remote control. Make sure to point the remote control at the camcorder’s remote sensor.
•The Random Assemble Editing Menu appears on the TV screen or the LCD monitor.
3 EXECUTE FADE/WIPE IN (IF NECESSARY)
Press FADE/WIPE on the remote control.
•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.
•You can’t use a Picture Wipe/Dissolve at the beginning of Program 1.
NOTES:
●When using a JVC VCR with a remote pause terminal, connect the EDIT jack on the camcorder to the VCR’s remote pause terminal using an editing cable.
●If you use a JVC VCR not equipped with a remote pause terminal or a
●Set the VIDEO OUT select switch of the cable adapter as required:
Y/C: When connecting to a TV or VCR which accepts Y/C signals and uses an
CVBS: When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.
●Before Random Assemble Editing, make sure the indications don't appear on the TV monitor. If they appear during Random Assemble Editing, they will be recorded onto the new tape. To clear the Playback Sound Mode Display, press DISPLAY on the RM-
V711U Remote Control. Select “DISPLAY” and “TIME CODE” from the Playback Menu (☞ pg. 54) to show or hide the Date/Time and the Time Code on the recording. To show or hide all indications except for the Random Assemble Editing Menu, press ON/OFF on the camcorder for longer than 1 second. When Random Assemble Editing starts, its indications disappear and are not recorded on the new tape.
CONTINUED ON NEXT PAGE