JVC LYT0216-001B specifications During Digital Zoom, Mode in the Recording Menu is set to OFF pg

EN71

SYMPTOM	POSSIBLE CAUSES
10. The tape is moving, but	10. •Your TV has AV input
there’s no picture.	terminals, but is not set to
	its VIDEO mode.

•The cassette’s cover is open.

11.In the 5-Second mode, 11. •The 5-Second mode in the

recording ends before	System Menu is set to
5 seconds have elapsed.	“ANIM.”.
12. Pro Snapshot mode	12. •The Squeeze mode is
cannot be used.	selected.
13. Digital Zoom doesn’t	13. •10X optical zoom is selected.
work.	•The Video Echo effect is
	activated.
	•Picture Wipe or Dissolve
	are being used in a scene
	transition.
	•5-Second recording was
	done with the Power Dial
	set to “5S”, and with “5SD”
	selected in the System Menu.
	•Pro Snapshot was attempted
	during Digital Zoom.
14. P.AE/Effects and Fade/	14. •The Power Dial is set to
Wipe Effects don’t work.	“	A	”.
	•The Power Dial is set to
	“5S”.
15. The Black & White Fader	15. •The Sepia or Monotone
doesn’t work.	effects are activated.
16. The Dissolve function	16. •P.AE/Effect Sepia,
doesn’t work.	Monotone or Slow is
	activated.

•The Squeeze mode is selected.

•The previously selected P.AE/Effect was changed after the last selected scene for editing was registered.

17.Scene transition does not 17. •When using “Picture Wipe/

go as expected.	Dissolve” (☞ pg. 38) or
	“Dissolves during 5 second
	mode recording” (☞ pg. 26),
	there is a delay of a fraction
	of a second between the
	previous record stop-point
	and the Dissolve start-point.
	This is normal, but this slight
	delay becomes especially
	noticeable when shooting
	fast-moving subject or
	during rapid panning.

CORRECTIVE ACTION

10.•Set the TV to the mode or channel appropriate for

video playback (☞ pg. 56, 57).

•Close the cassette's cover (☞ pg. 12).

11.•Select “5S” or “5SD” in the System Menu (☞ pg. 35).

12.•Disengage the Squeeze mode (☞ pg. 32).

13.•Turn off the Video Echo effect (☞ pg. 43).

•Wait until the Picture Wipe or Dissolve effects are completed (☞ pg. 38).

•Change the setting of either the System Menu or the Power Dial (☞ pg. 34).

•Do not attempt to take a Pro Snapshot when performing Digital Zoom (☞ pg. 26).

14.•Set the Power Dial to “ M ”

(☞ pg. 17).

•Change the setting of the Power Dial.

15.•Turn off Sepia and Monotone (☞ pg. 42).

16.•Turn off Sepia, Monotone or Slow before adding Dissolve to a scene

transition (☞ pg. 42). •Make sure that the Squeeze

mode in the Recording Menu is set to “OFF” (☞ pg. 32).

•Make sure you have selected the P.AE/Effects you want before starting editing (☞ pg. 42).

17.

————

CONTINUED ON NEXT PAGE