JVC LYT0216-001B FADE/WIPE Effects, Accessmenu Manual Mode Item, Access FADER/WIPE Menu

36ENRECORDING

AdvancedFeatures(Cont.)

FADE/WIPE Effects

IMPORTANT:

●When the Digital Image Stabilizer is activated, the Fade/Wipe Effects are not available.

●If certain P.AE/Effects (☞ pg. 42) are activated or if the Progressive Dial is set to "VIDEO", some Fade/ Wipe Effects cannot be used. If you select a Fade/Wipe Effect that is unusable in the current situation, the indication blinks.

Use these to spice up the transition from one scene to the next. You can also vary transitions from scene to scene. Refer to pages 36 – 41 for Fade/Wipe effects and techniques.

Select any one effect from the Fader/Wipe Menu.

Display

FOCUS	AUTO	FADER / WIPE
EXPOSURE	AUTO			P	WIPE – SHUTTER
W. BALANCE	AUTO		? R		RANDOM
4FADER	OFF				OFF
/ WIPE		SEL. 4	WH		FADER – WHITE
P. AE	OFF		BK		FADER – BLACK
/ EFFECT			B W		FADER – B.W
					WIPE–CORNER

MANUAL

WH

PAUSE

RETURN

Manual Mode Item Menu Fader/Wipe Menu

Power Dial

LAY	OFF A
P
	M
	5S

Lock button

START/STOP button

Select Dial

1 SELECT OPERATION MODE

First turn the Power Dial to “ M ” while pressing down the lock button located on the dial, make sure the LCD monitor is open fully or the viewfinder is pulled out.

2 ACCESSMENU MANUAL MODE ITEM

Press the Select Dial.

3 ACCESS FADER/WIPE MENU

Move the pointer and highlight bar to “FADER/ WIPE” by rotating the Select Dial and then press it. The Fader/Wipe Menu appears.

4 SELECT EFFECT

Move the pointer and highlight bar to the desired effect by rotating the Select Dial, then press it.

•The Fader/Wipe Menu disappears and the effect is reserved. The indicator representing the selected effect appears.

5 START RECORDING

Press START/STOP to start recording and activate fade- or wipe- in

OR . . .

END RECORDING

Press START/STOP to end recording and activate fade- or wipe- out.

6 TO CANCEL FADE/WIPE EFFECTS

In step 4, move the pointer and highlight bar to “OFF”. Press the Select Dial.